Fun, Learning, Friendship and Mutual Respect
START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Other Makes and Models Helicopters > Quick of Japan


Quick of Japan QJ Helicopters


Reply
 
Thread Tools Display Modes
Old 05-21-2010, 04:49 PM   #1
DiaLFonZo
Registered Users
 

Join Date: Jun 2009
Location: Quebec Canada
Default QJ EP-10

Hi all,

I will be one of the one who own a Quick Of Japan soon.

Just ordered an EP-10 and will have it maybe next week.

Does anybody have one who can send me some pictures, and tell me if they like it... and maybe have some trick...

Tanks

Eric Nantel
Quebec Canada
DiaLFonZo is offline        Reply With Quote
Old 05-21-2010, 10:22 PM   #2
quickfighter
Registered Users
 

Join Date: Jan 2010
Location: Marshville N.C.
Default

Hey Eric, I think you will like the EP10. It is a very smooth running machine. It has plently of room to run a good size battery pack. Japan sends a nice lightweight battery tray that works well.

Harold
quickfighter is offline        Reply With Quote
Old 05-22-2010, 07:21 AM   #3
DiaLFonZo
Registered Users
Thread Starter Thread Starter
 

Join Date: Jun 2009
Location: Quebec Canada
Default EP-10

Tanks Harold,

Does anyone know if i can find a Metal main grip upgrade ?
And witch size battery for my setup.

Outrage 1320kv motor.
Don't know yet the pinino They will send.

Tanks
DiaLFonZo is offline        Reply With Quote
Old 05-22-2010, 07:27 PM   #4
quickfighter
Registered Users
 

Join Date: Jan 2010
Location: Marshville N.C.
Default

Eric, I never had anyone want the metal blade grips after flying the ones that come in the kit. It runs goods.

I would run a 5 cell or a 6 cell pack.

Harold
quickfighter is offline        Reply With Quote
Old 05-23-2010, 08:32 AM   #5
DiaLFonZo
Registered Users
Thread Starter Thread Starter
 

Join Date: Jun 2009
Location: Quebec Canada
Default QJ

Tanks Harold,

I am now worry by the plastic part itself... it was only for
the bling factor.. lol

Eric Nantel
DiaLFonZo is offline        Reply With Quote
Old 05-25-2010, 09:01 AM   #6
quickfighter
Registered Users
 

Join Date: Jan 2010
Location: Marshville N.C.
Default

Eric, In all the years I sold the heli, I never had anyone to have to replace on of the blade grips.

Harold
quickfighter is offline        Reply With Quote
Old 05-27-2010, 01:01 PM   #7
DiaLFonZo
Registered Users
Thread Starter Thread Starter
 

Join Date: Jun 2009
Location: Quebec Canada
Default EP-10v2

Just arrived...
My wife did pick the package, can't wait to leave office... !!!!

Will post pictures... is someone interested ?

Eric Nantel
Qc Canada
DiaLFonZo is offline        Reply With Quote
Old 05-27-2010, 09:04 PM   #8
DiaLFonZo
Registered Users
Thread Starter Thread Starter
 

Join Date: Jun 2009
Location: Quebec Canada
Default

Build Started...

Unless missing 2 parts... it's wonderful.

Pictures
DiaLFonZo is offline        Reply With Quote
Old 05-28-2010, 07:35 AM   #9
quickfighter
Registered Users
 

Join Date: Jan 2010
Location: Marshville N.C.
Default

That looks great. I like the way you have the linkages set up on the tail rotor, that is the way I was shown by Cliff Haitt to set it up.
The landing gear Charles sells is very forgiving, and they look good too, you may want to look at them later.

Harold Good Pictures!
quickfighter is offline        Reply With Quote
Old 05-28-2010, 02:37 PM   #10
DiaLFonZo
Registered Users
Thread Starter Thread Starter
 

Join Date: Jun 2009
Location: Quebec Canada
Default

Harold,

Is there another way to setup the tail... ?
DiaLFonZo is offline        Reply With Quote
Old 05-28-2010, 08:33 PM   #11
DiaLFonZo
Registered Users
Thread Starter Thread Starter
 

Join Date: Jun 2009
Location: Quebec Canada
Default Today

Hi all,

Will it be enough to power 4 digital standar size servo.... !!!

Link

Guess yes... LOL


Eric Nantel
Qc Canada
DiaLFonZo is offline        Reply With Quote
Old 05-29-2010, 10:16 AM   #12
quickfighter
Registered Users
 

Join Date: Jan 2010
Location: Marshville N.C.
Default

Well, you can move the pivot balls to the inner holes on the blade grips. If you do that, the lever arm for the servo will not be in the center of travel. It is a mistake some people make.

Harold
quickfighter is offline        Reply With Quote
Old 05-29-2010, 02:39 PM   #13
DiaLFonZo
Registered Users
Thread Starter Thread Starter
 

Join Date: Jun 2009
Location: Quebec Canada
Default

Ok Harold,

I have only follow the manual.. lol
Ain't try the other way, good to know i have do it right the first time... lol

Tanks

Eric Nantel
DiaLFonZo is offline        Reply With Quote
Old 05-31-2010, 09:24 PM   #14
DiaLFonZo
Registered Users
Thread Starter Thread Starter
 

Join Date: Jun 2009
Location: Quebec Canada
Default QJ EP-10

Will have 4 ino-Lab standar size digital servos.

Can't wait...
DiaLFonZo is offline        Reply With Quote
Old 06-10-2010, 08:15 PM   #15
quickfighter
Registered Users
 

Join Date: Jan 2010
Location: Marshville N.C.
Default

Eric, you did it the right way. If you use the other holes on the tail rotor blade grips, it does not center the pitch change unit on the tailrotor shaft. So then you do not have very much travel in one direction.

Hope you get this heli together and up and running well. You may want to get the optional landing gear for the EP 10. They are great. They are very forgiving. All you can do with them in a crash is bend the Alum skid bars. They are cheap from Charles.

Harold
quickfighter is offline        Reply With Quote
Old 06-11-2010, 06:20 AM   #16
DiaLFonZo
Registered Users
Thread Starter Thread Starter
 

Join Date: Jun 2009
Location: Quebec Canada
Default EP-10

Harold,

I have ordered the skid, but ain't broke any skid in my like... lol
The parts that was missing in my kit where send with that kit last week
and i don't have them at the moment.

Can't wait to continue the build.

Do you know if i can put 500mm blades on that bird ?

Tanks

Eric Nantel
Qc Canada
DiaLFonZo is offline        Reply With Quote
Reply




Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Other Makes and Models Helicopters > Quick of Japan


Quick of Japan QJ Helicopters

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Copyright © 2004-2011 - William James - Helifreak.com