Outrage G5 build HINT and TIPS - Page 6

scnsaracer · 08-25-2010, 02:12 PM

Thanks for the tip. I will give that a try.

Quote:

Originally Posted by HFG

The loose grips is usually caused by the inner radial bearing in the grips moving, try loctiting it to the grip.

s0laris · 08-25-2010, 07:11 PM

The loose grips I have too. But Heli flies fantastic. I tried loktite

No appreciable difference in performance noted

<3My480Pro · 07-18-2011, 06:50 PM

Just received my brand new G5 and notice a few things needed modding. On the rear belt shaft I notice that you needed to use high strength thread lock to keep the shaft in place. So instead of using loctite, I drilled and threaded the center of the shaft to use a M2x3mm screw to keep it in place instead.

08-25-2010, 07:11 PM	#102
s0laris Registered Users Join Date: Sep 2006 Location: canada	The loose grips I have too. But Heli flies fantastic. I tried loktite No appreciable difference in performance noted __________________ Outrage 550, Goblin 630, 700, warp 360, Dual BL Mcpx, 130x When you start to be in complete control reflexes are not a requirement.

07-18-2011, 06:50 PM	#103
<3My480Pro Registered Users Join Date: Jan 2011 Location: Garden Grove, California	:) Just received my brand new G5 and notice a few things needed modding. On the rear belt shaft I notice that you needed to use high strength thread lock to keep the shaft in place. So instead of using loctite, I drilled and threaded the center of the shaft to use a M2x3mm screw to keep it in place instead. Last edited by <3My480Pro; 07-19-2011 at 12:53 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode