What sort of temp's are you 4#6 Guys seeing on the motor?

damo666 · 12-04-2011, 12:09 AM

Hi Men,

I have a 4#6 Bell here, and am seeing around 7 mins of indoor flight out of a stock cb100 lipo (1s 500mAH), and somewhere around 8 mins from the stock 4#6 lipo.

When i've finished flying, I always check the motor temps and see between 125-135F which seems a little hot to me. The temps on my cb100 motor have never exceed 107F.

What sort of temperatures are you guys seeing?

flingwing628 · 11-21-2012, 09:15 AM

Theses little motors run hot...... you can help it a little by wrapping some sorldering wire around the motor...5 or 6 times is good..... will run 100 to 110 on my temp gun.

12-04-2011, 12:09 AM	#1
damo666 Registered Users Join Date: Nov 2011 Location: Socal	What sort of temp's are you 4#6 Guys seeing on the motor? Hi Men, I have a 4#6 Bell here, and am seeing around 7 mins of indoor flight out of a stock cb100 lipo (1s 500mAH), and somewhere around 8 mins from the stock 4#6 lipo. When i've finished flying, I always check the motor temps and see between 125-135F which seems a little hot to me. The temps on my cb100 motor have never exceed 107F. What sort of temperatures are you guys seeing?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-21-2012, 09:15 AM	#2
flingwing628 Registered Users Join Date: Oct 2011 Location: arabi ga.	Theses little motors run hot...... you can help it a little by wrapping some sorldering wire around the motor...5 or 6 times is good..... will run 100 to 110 on my temp gun.