New KDE Direct Main Gear Case for 600! Allows Use of the 700N Main Gear! - Page 4

markb · 10-04-2011, 05:50 PM

Will the kde hub allow me to use the slant cut 112 tooth gear/pinion on my trex600esp?

I would like the quieter drive, and fly mild/smooth 3d so I doubt my power requirements would strip it. I never stripped the stock 600 gears.

Breezyjr · 10-05-2011, 08:15 AM

I don't see why not..... it is just a replacement/upgrade to the stock hub....

Good Luck,
Joe_Breezy

Four Stroker · 12-02-2011, 01:51 PM

KDE, are you going to produce an AT 550/600-MGC that will work with the new third generation tail drive gear from Align. That is, one with 4 mm extra depth for the radial bearing ?

BOGUS POST

The H60200 has obsoleted the KDE part.

THX1138 · 01-17-2012, 06:27 PM

Can someone tell me what the O/D is of the KDE 115T main gear? I am looking to do this mod so as to back my Scorpion 560 off the cyclic servos....

Lou

10-04-2011, 05:50 PM	#61
markb Registered Users My HF Map location Join Date: Sep 2007 Location: Virginia Beach, VA	Will the kde hub allow me to use the slant cut 112 tooth gear/pinion on my trex600esp? I would like the quieter drive, and fly mild/smooth 3d so I doubt my power requirements would strip it. I never stripped the stock 600 gears. __________________ Mark Logo 600se, Scorpion 5020-450, mini-V, Jive 80HV Trex 600 ESP FBL, Scorpion 4025-740, cgy750, CC85HV Trex 450 Vx FBL, Scorpion 2221-10, RJX head, mini-V, Ice 50

10-05-2011, 08:15 AM	#62
Breezyjr Registered Users My HF Map location Join Date: Apr 2009 Location: Commerce Twp, MI	I don't see why not..... it is just a replacement/upgrade to the stock hub.... Good Luck, Joe_Breezy __________________ Diablo, Shape 9.0, Goblin 700, Sylphide 90, Srimok 90N, Srimok 90E, Dune, Vibe 90SG FB & FBL, TDR, 700E F3C, E-Aurora, Raptor 90SE, Logo 600SE, T600 ESP, T600NSP, Synergy E6, N5, Logo 500SE, Vibe 50, Warp 360, Gaui NX4 & X4,T500, T450 Pro FBL, 130x

12-02-2011, 01:51 PM	#63
Four Stroker Registered Users Join Date: Jan 2009 Location: Atlanta	KDE, are you going to produce an AT 550/600-MGC that will work with the new third generation tail drive gear from Align. That is, one with 4 mm extra depth for the radial bearing ? BOGUS POST The H60200 has obsoleted the KDE part. Last edited by Four Stroker; 12-04-2011 at 02:51 PM..

01-17-2012, 06:27 PM	#64
THX1138 Registered Users Join Date: May 2004 Location: Indianapolis, IN	Can someone tell me what the O/D is of the KDE 115T main gear? I am looking to do this mod so as to back my Scorpion 560 off the cyclic servos.... Lou __________________ Time is an illusion. Lunch time, doubley so.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode