ENV 90 TT rubber bearing supports

tomra · 02-17-2012, 02:44 AM

Hi guys.

Need some help here. How tight or loose are the torque tube bearing rubber supports supposed to be inside the boom. My assembly slides straight through the boom without lubrication and i can ever so slightly wiggle the rubbers around inside the boom. Is this normal on the ENV?

mdu6 · 02-17-2012, 04:54 AM

Same thing happend on mine. I added about 2 layers of electrical tape around the rubber and everything is fine.

benben · 02-17-2012, 09:32 AM

I used the align rubber tt bearing support. Fits the boom much better than the stock ones.

tomra · 02-17-2012, 02:49 PM

Thanks guys!

I´ll try out the T-Rex 700 bearing rubbers

tomra · 02-23-2012, 02:55 AM

Just installed the T-Rex 700 rubbers. Perfect fit!

02-17-2012, 02:44 AM	#1
tomra Registered Users Join Date: Jan 2008 Location: Norway	ENV 90 TT rubber bearing supports Hi guys. Need some help here. How tight or loose are the torque tube bearing rubber supports supposed to be inside the boom. My assembly slides straight through the boom without lubrication and i can ever so slightly wiggle the rubbers around inside the boom. Is this normal on the ENV?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-17-2012, 04:54 AM	#2
mdu6 Registered Users Join Date: Feb 2009 Location: Montreal	Same thing happend on mine. I added about 2 layers of electrical tape around the rubber and everything is fine.

02-17-2012, 09:32 AM	#3
benben Registered Users Join Date: Apr 2004 Location: Earth	I used the align rubber tt bearing support. Fits the boom much better than the stock ones.

02-17-2012, 02:49 PM	#4
tomra Registered Users Thread Starter Join Date: Jan 2008 Location: Norway	Thanks guys! I´ll try out the T-Rex 700 bearing rubbers

02-23-2012, 02:55 AM	#5
tomra Registered Users Thread Starter Join Date: Jan 2008 Location: Norway	Just installed the T-Rex 700 rubbers. Perfect fit!