Your GAUI X7 Setup

[Chris Sexton]

This has been a good resource on other threads, and I didn't see another dedicated to just listing setups. With the release just next week, lets start listing out your planed setup. For reference sake, lets try and list them in a similar format. Also, please keep on topic, discussing your setup is encouraged, but lets not start a "why mine is better than yours" thread.


X7
Flight Style:
FBL System:
Motor:
Pinion:
Target Headspeed(s):
ESC:
Governor:
BEC:
RX Pack:
Cyclic Servos:
Tail Servo:
Main Blades:
Tail Blades:
Lipos:

[Chris Sexton]

Mine:


X7
Flight Style: Sport
FBL System: Spektrum AR7200BX
Motor: Scorpion HKIII-4035-500
Pinion: 11T or 12T - Ordered both
Target Headspeed(s): 2200/2300
ESC: CC ICE2 120HV
Governor: CC
BEC: CC BEC PRO V2
RX Pack: None
Cyclic Servos: Savox SB-2271SG @ 7.4v
Tail Servo: Savox SB-2272SG @ 7.4v
Main Blades: Rail 696
Tail Blades: Rail 106
Lipos: Hyperion VX G3 35C 4200mAh (12s)

[akamullen]

X7
Flight Style: Med/Hard 3D
FBL System: Spektrum AR7200BX
Motor: HKIII 4035-500
Pinion: ??
Target Headspeed(s): 2250/2300
ESC: CC 120
Governor: internal
BEC: Gryphon 75V 20A Hyper HV BEC
RX Pack: none
Cyclic Servos: Savox 2271SG brushless @ 8.4
Tail Servo: Outrage Torque BL9188 @8.4
Main Blades: EDGE SE 693mm
Tail Blades: Edge 105's
Lipos: Voltz 5000 65C, Pulse 5000 65C

[jaubertel]

For X7 (#1 ou #2 I d'ont know)

X7
Flight Style: Hard 3D
FBL System: BeastX V3.08
Motor: Scorpion 4525-520LE
Pinion: 11T or 12T
Target Headspeed(s): 1750 / 1950 / 2100
ESC: Castle 160HV / Scorpion V 130A
Governor: Yes
BEC: No BEC
RX Pack: LifePO4 2100 2S
Cyclic Servos: MKS DS670
Tail Servo: Align DS650
Main Blades: Funkey / Edge 693mm
Tail Blades: Funkey / Align
Lipos: Flighmax Zippy 4500 45C (in wait of RB LIPO)

[Rob Cherry]

Flight Style: Nuts Smack
FBL System: vBar 5.2
Motor: HKIII 4035-560
Pinion: 10T
Target Headspeed(s): 2000/2200/2400
ESC: YGE 120HV
Governor: vBar gov
BEC: Gryphon 75V 20A Hyper HV BEC
RX Pack: none
Cyclic Servos: Savox 2271SG brushless @ 8.4
Tail Servo: Outrage Torque BL9188 @8.4
Main Blades: EDGE FB 693mm
Tail Blades: SAB 95 Red Devil
Lipos: Gens 5300 30C

[Matt Nasca]

Flight Style: Fast Big Air / Smack 3D
FBL System: Mikado Full Size VBar 5.2 Pro
Motor: Scorpion 4525-520 LE
Pinion: 11T
Target Headspeed(s): 2145-2334-2430
ESC: Scorpion Commander V 130A
Governor: VBar gov
BEC: Scorpion Built-in BEC
RX Pack: None
Cyclic Servos: JR 8917HV @ 7.4
Tail Servo: Futaba BLS256HV @ 7.4
Main Blades: EDGE 693 SE FBL
Tail Blades: EDGE 95mm
Lipos: Voltz 65C 5100 mAh

[akschu]

X7
Flight Style: Sport/Mild 3D
FBL System: BeastX
Motor: Scorpion 4035-500
Pinion: 10t, 11t, 12t
Target Headspeed(s): 2000, 21500, 2300
ESC: ZTW 120A Opto
Governor: none
BEC: CC BEC Pro wired for 6s at 7.4v
RX Pack: none
Cyclic Servos: Savox 2271
Tail Servo: Savox 2272
Main Blades: Align HD690B
Tail Blades: KBDD 102mm
Lipos: Spyder 6s5300

[Sandu]

Flight Style: 3D
FBL System: BeastX v. 3
Motor: HK4035-500kv
Pinion: 10t going to be bigger
Target Headspeed(s): 2200
ESC: Castle Creations 120HV2
Governor: Castle
BEC: Gryphon 75V 20A Hyper HV BEC
RX Pack: none
Cyclic Servos: savöx SC-1267SG
Tail Servo: Savöx SH-1290MG
Main Blades: rotortech 690mm
Tail Blades: rotortech 105mm
Lipos: turnigy 5000mAh 40C 6s X4

[zxiicci]

X7
Flight Style: 3D
FBL System: BeastX V3.08
Motor: Scorpion 4035-500kv
Pinion: 11 or 12T
Target Headspeed(s): 2100
ESC: Scorpion commander V 130HV with bec
Governor: Yes
BEC: commander V
RX Pack:-
Cyclic Servos: Savöx TG1258
Tail Servo: Savöx 1290MG
Main Blades: Rotortech 693mm
Tail Blades: Rotortech
Lipos: turnigy 5000mAh 40C 6

[frito169]

Anyone planning on using a hk-4035-5xx should know the 25mm bolt pattern wont fit on the motor mount you need the hkIII-4035-5xx with both the 25 and 30mm mounting holes and you can only use 2 bolts.

[zxiicci]

Originally Posted by frito169

Anyone planning on using a hk-4035-5xx should know the 25mm bolt pattern wont fit on the motor mount you need the hkIII-4035-5xx with both the 25 and 30mm mounting holes and you can only use 2 bolts.

Actually Gaui X7 A combo comes with scorpion HKIII-4035-500kv (this one: http://www.scorpionsystem.com/catalo...KIII_4035_500/ )
motor and its bolted on to motor mount with 4 bolts!

How do i know? because I have one and it flew first time today!

[Rob Cherry]

Originally Posted by zxiicci

Actually Gaui X7 A combo comes with scorpion HKIII-4035-500kv (this one: http://www.scorpionsystem.com/catalo...KIII_4035_500/ )
motor and its bolted on to motor mount with 4 bolts!

How do i know? because I have one and it flew first time today!

Weird indeed. The HK3-4035-560 doesn't mount with all 4 bolts, but only the 30mm pair.

[Sandu]

I have one too bolted with 4 bolts. Maby it's some gauis special model made for X7 or something

[Chris Sexton]

Only two bolts on my hkiii-4035-500 lined up.


Sent from my iPhone using Tapatalk

[Patrick Senjay]

X7
Flight Style: Sport & Soft 3D <=== (for now)
FBL System: Mikado V-bar 5.2pro
Motor: Gaui/Scorpion HKIII 4035 - 500KV
Pinion: 11T
Target Headspeed(s): 1800 - 1950 - 2180
ESC: YGE 160 HV
Governor: V-Bar Governor
BEC: Gryphon Quasar
RX Pack: None
Cyclic Servos: Futaba BLS 156HV @ 8.4v
Tail Servo: Futaba BLS 256HV @ 8.4v
Main Blades: Edge FBL 713mm
Tail Blades: Edge 105mm
Lipos: Hyperion 4200 35c

[bjb714]

Flight Style: Sport and Light 3D
FBL System: MIkado Mini V-Bar 5.2
Motor: Scorpion HKIII 4035-500
Pinion: 12T
Target Headspeed: 2200
ESC: Castle ICE2 120HV
Governor: Castle
BEC: Castle BEC PRO V2
RX Pack: None
Cyclic Servos: Savox 1268MG@ 7.4v
Tail Servo: Outrage Torq 9188@ 7.4v
Main Blades: Edge 693
Tail Blades: Edge 105
Lipos: Chrome 6S 5000 35c x2

[ragtop01]

Flight Style: 3D wanna smack
FBL System: beastx
Motor: 700mx
Pinion: 10
Target Headspeed(s): 2400
ESC: Castle ICE2 80hv
Governor: 100 flat
BEC: CC bec pro on 12s
RX Pack:
Cyclic Servos: ds610
Tail Servo: ds620
Main Blades: Sab 690
Tail Blades: Stealth 105
Lipos: GensAce 4000 12s

[savage600]

X7
Flight Style: Sports flying and some 3d
FBL System: Beast-x v3
Motor: Scorpion 4525 520
Pinion: 10 tooth
Target Headspeed(s): ?
ESC: New scorpion 130 amp
Governor:maybe
BEC:CC bec pro
RX Pack: kypom
Cyclic Servos:Inolab 850 mg's
Tail Servo:Futaba bls 251
Main Blades : domonis hagele 711's
Tail Blades:carbons to match mains
Lipos:Turnigy 5000's

Still a couple of weeks till I get her in the air, but will be worth the wait.

Cheers dave.

[xfactor6]

Originally Posted by ragtop01

Flight Style: 3D wanna smack
FBL System: beastx
Motor: 700mx
Pinion: 10
Target Headspeed(s): 2400
ESC: Castle ICE2 80hv
Governor: 100 flat
BEC: CC bec pro on 12s
RX Pack:
Cyclic Servos: ds610
Tail Servo: ds620
Main Blades: Sab 690
Tail Blades: Stealth 105
Lipos: GensAce 4000 12s

hey, i saw you are running a 700mx, what did you do about the pinion not touching the main shaft 100%? mine only touches about 75% did you grind another spot for the grub screw that holds it and move the pinion down?

[Magooch]

X7
Flight Style: sport, entry 3d
FBL System: beastX
Motor: Scorpion HKIII 4035-500
Pinion: 11
Target Headspeed(s): 1900 2000 2100
ESC: CC ICE2 120HV
Governor: CC
BEC: CC BEC PRO
RX Pack: none
Cyclic Servos: Savox 1258 TG
Tail Servo: Savox 1290 MG
Main Blades: Edge 693
Tail Blades: Edge 105
Lipos: Turnigy 5000 (for now)

The kit is still being shipped (thanks Dave!), just looking at pictures for now ... Feel like an impatient little kid, so looking forward to this build!