Brushless MPCX with Extras **SOLD**

gitbse · 02-28-2012, 05:55 PM

I don't fly my MCPX anymore, the little guy needs a good home. It is in perfect flying condition, I just fly the big ones too much, and want to expand the larger fleet. It has the AEO brushless kit on it, with a 9 tooth pinion installed.

The board on it now is a V1 board that blew the tail mosfet, and I did the brushless fet jump conversion. It flies very nicely. I will be including two (2) extra boards, one is a V1 in perfect condition, and the other a V2 board, with a blown tail mosfet. I have not figured out how to jump the tail fet to the main fet on the V2 board yet, the board is setup slightly different. The solder spots are the same, however I cannot find the power source powering and controlling the main motor fet, which the tail is now connected to. The board works, except that I wasn't able to disable the throttle control going to the tail with the jump I put on, so the tail follows the main throttle. If you can find that power source on the V2 board and jump it properly, it wil be a working V2.

Also included are the eflite charger and ac adapter, the original brushed motor if you wanna convert back, and four (4) lectron-pro 35c batteries.
And an extra kbdd tail blade.
I'm asking $185 for the package including shipping, the little guy needs a good home.

Pics are included, any other questions let me know.

Mega Stumbler · 02-28-2012, 06:22 PM

You have a PM.

rdandy5875 · 02-28-2012, 06:26 PM

Can you reduce the picture size just a little ????? ;-) .

GLWS...

gitbse · 02-28-2012, 06:36 PM

Sorry bout that ... don't know why that happened from phone to email. Lol.

gitbse · 02-28-2012, 07:43 PM

Sold
Thanks everybody for looking

02-28-2012, 05:55 PM	#1
gitbse Registered Users My HF Map location Join Date: Mar 2011 Location: Palmer, MA	Brushless MPCX with Extras SOLD I don't fly my MCPX anymore, the little guy needs a good home. It is in perfect flying condition, I just fly the big ones too much, and want to expand the larger fleet. It has the AEO brushless kit on it, with a 9 tooth pinion installed. The board on it now is a V1 board that blew the tail mosfet, and I did the brushless fet jump conversion. It flies very nicely. I will be including two (2) extra boards, one is a V1 in perfect condition, and the other a V2 board, with a blown tail mosfet. I have not figured out how to jump the tail fet to the main fet on the V2 board yet, the board is setup slightly different. The solder spots are the same, however I cannot find the power source powering and controlling the main motor fet, which the tail is now connected to. The board works, except that I wasn't able to disable the throttle control going to the tail with the jump I put on, so the tail follows the main throttle. If you can find that power source on the V2 board and jump it properly, it wil be a working V2. Also included are the eflite charger and ac adapter, the original brushed motor if you wanna convert back, and four (4) lectron-pro 35c batteries. And an extra kbdd tail blade. I'm asking $185 for the package including shipping, the little guy needs a good home. Pics are included, any other questions let me know. Attached Thumbnails __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Skookum Support Rep Mini Protos SK540,Rave ENV SK540, 4525 LE Runways are for models and wings are for fairies. Last edited by gitbse; 02-28-2012 at 07:43 PM.. Reason: sold

02-28-2012, 06:36 PM	#4
gitbse Registered Users Thread Starter My HF Map location Join Date: Mar 2011 Location: Palmer, MA	Sorry bout that ... don't know why that happened from phone to email. Lol. __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Skookum Support Rep Mini Protos SK540,Rave ENV SK540, 4525 LE Runways are for models and wings are for fairies.

02-28-2012, 07:43 PM	#5
gitbse Registered Users Thread Starter My HF Map location Join Date: Mar 2011 Location: Palmer, MA	Sold Thanks everybody for looking __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Skookum Support Rep Mini Protos SK540,Rave ENV SK540, 4525 LE Runways are for models and wings are for fairies.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-28-2012, 06:22 PM	#2
Mega Stumbler My HF Map location Join Date: Aug 2011 Location: Kansas	You have a PM.

02-28-2012, 06:26 PM	#3
rdandy5875 Registered Users My HF Map location Join Date: Jan 2012 Location: Buffalo, NY	Can you reduce the picture size just a little ????? ;-) . GLWS...