Hyperion EOS0610i

m1a2ab · 02-29-2012, 10:18 PM

Does anyone have any input on this charger? Is it ok? Thanks.

Egroeg · 03-01-2012, 05:23 PM

I have one.
It's very nice.
I use it to charge mainly small packs...up to 3 cell LiPos ...and my lead acid battery.
Has built in power supply...rated at 50 W I believe.

The WoodCrafter · 03-01-2012, 09:56 PM

Really light duty charger.

What do you plan on charging?

m1a2ab · 03-01-2012, 10:18 PM

6s 5000 mah batteries 22.2v.

Egroeg · 03-02-2012, 01:02 AM

If I am correct ,the charger is rated at 50 Watts.
The 6 cell batt. Is at 3.8volts/cell therefore 6x3.8= 22.8 nominal battery pack.
50 watts/ 22.8= 2.19 Amperes.
Battery is a 5Amp one, therefore 5/ 2.19= less than half the charging rate.
It will take some time and is not ideal in for charging 5000mah batteries.

m1a2ab · 03-02-2012, 01:13 AM

Thanks for the response!

kcordell · 03-03-2012, 08:01 AM

610i DUO? You have been given incorrect information if this is the charger.
It is rated at 180watts/channel.
I charge 5000mah batteries at 1C (5amps) on both sides all day long.

The WoodCrafter · 03-03-2012, 11:22 AM

After a search it looks like kcordell is right. It is a 180W/channel charger.
Still too small for 6S 5000mAh pack I think.
The max you will only be able to charge is 1.4C
Doable but pretty weak.

theColonel · 03-03-2012, 09:15 PM

Isn't the single channel 610i rated at 250W ?? If so, it should be just about capable of 2C for a 5000mah 6S pack.

Is it OK? Yes, it's definitely OK!! If you want to charge multiple 5000mah 6S packs at the same time, then a more powerful charger would be better, BUT it all comes down to the how quickly or how many you need to charge, only you can determine if it meets your needs!

02-29-2012, 10:18 PM	#1
m1a2ab Registered Users Join Date: Mar 2009 Location: Fort Myers	Hyperion EOS0610i Does anyone have any input on this charger? Is it ok? Thanks.

03-01-2012, 05:23 PM	#2
Egroeg Registered Users My HF Map location Join Date: Mar 2008 Location: Nicosia Cyprus	I have one. It's very nice. I use it to charge mainly small packs...up to 3 cell LiPos ...and my lead acid battery. Has built in power supply...rated at 50 W I believe. __________________ No Pitch...No Fun!!! To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

03-02-2012, 01:02 AM	#5
Egroeg Registered Users My HF Map location Join Date: Mar 2008 Location: Nicosia Cyprus	If I am correct ,the charger is rated at 50 Watts. The 6 cell batt. Is at 3.8volts/cell therefore 6x3.8= 22.8 nominal battery pack. 50 watts/ 22.8= 2.19 Amperes. Battery is a 5Amp one, therefore 5/ 2.19= less than half the charging rate. It will take some time and is not ideal in for charging 5000mah batteries. __________________ No Pitch...No Fun!!! To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

03-03-2012, 08:01 AM	#7
kcordell Registered Users Join Date: Aug 2006 Location: St. Louis, Missouri	610i DUO? You have been given incorrect information if this is the charger. It is rated at 180watts/channel. I charge 5000mah batteries at 1C (5amps) on both sides all day long. __________________ Team Futaba, Team Miniature Aircraft, Team Flightpower, Radix Blades, VelTye, YS Engines

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-01-2012, 09:56 PM	#3
The WoodCrafter Registered Users Join Date: Jan 2010 Location: Westminster, California	Really light duty charger. What do you plan on charging?

03-01-2012, 10:18 PM	#4
m1a2ab Registered Users Thread Starter Join Date: Mar 2009 Location: Fort Myers	6s 5000 mah batteries 22.2v.

03-02-2012, 01:13 AM	#6
m1a2ab Registered Users Thread Starter Join Date: Mar 2009 Location: Fort Myers	Thanks for the response!

03-03-2012, 11:22 AM	#8
The WoodCrafter Registered Users Join Date: Jan 2010 Location: Westminster, California	After a search it looks like kcordell is right. It is a 180W/channel charger. Still too small for 6S 5000mAh pack I think. The max you will only be able to charge is 1.4C Doable but pretty weak.

03-03-2012, 09:15 PM	#9
theColonel Registered Users Join Date: May 2009 Location: Leeds	Isn't the single channel 610i rated at 250W ?? If so, it should be just about capable of 2C for a 5000mah 6S pack. Is it OK? Yes, it's definitely OK!! If you want to charge multiple 5000mah 6S packs at the same time, then a more powerful charger would be better, BUT it all comes down to the how quickly or how many you need to charge, only you can determine if it meets your needs!