logo 600 se Motor

[matt blaisdell]

I am sorry for asking this but i want to know a good powerful 12s scorpion motor that works awesome with the logo 600 se..

i sure this has been answered before but i do not know . thanks guys

[deepak]

Hi
the scorpion 4035 - 450kv
d

[povern]

Pyro 700-45L

[Nko15]

4525-520 Ultimate, 4525-520LE, 4530-540.... Or just the good old 5020-450 wich mikado puts in the 600SE kits.

But, for the everydag average flier, the 4035-450 will do.

[crhelipad]

I have this motor in mine it is amazing it all ways comes in at 100 - 112 deg after 7 min flight of moderate 3D
very happy with the results

[beans07]

Interested to hear more results as I was thinking about converting my Logo6003D 10s 4035-560kv to a 12s 4035-450kv heli (I can get one really cheap).

[Freeskiken]

What's the difference between the 5020-450 and the 4035-450 ? I just bought the 4035-500 and the 4035-450. 600se on 12 s.

[mahbouni]

I've tried both the Pyro 700-45 and the Scorp 5025-440. Hard to tell the difference between the two in terms of performance. I also tried an Align 700MX 470KV. It was not bad but I could bog it more easily.

[GimpyGolden]

Originally Posted by beans07

Interested to hear more results as I was thinking about converting my Logo6003D 10s 4035-560kv to a 12s 4035-450kv heli (I can get one really cheap).

Why? 10S with the 560 is a really strong setup and light setup.
I am stretching my 600 back to an SE and keeping the 560 with 11 tooth on 10S. Hope the Jive 80 keeps up.

[gravydrive]

Originally Posted by GimpyGolden

Why? 10S with the 560 is a really strong setup and light setup.
I am stretching my 600 back to an SE and keeping the 560 with 11 tooth on 10S. Hope the Jive 80 keeps up.

I'll be interested to hear how it fairs, I'm thinking of dropping down to 10S on my SE and want to keep the Jive 80+ HV and Pyro 700-45 I have on there now.

[GimpyGolden]

Pyro 700-45 is no problem on 10S w/J80Hv and 13tooth, done that and it's even a Mikado recommended setup.
The 4035-560 is another thing altogether as it can pull some serious current compared to the Pyro. I've logged 6Kw+ with it on L600 3D through Jive 80.
Going to stick to spec to start, 1800HS and 12* max pitch.

[matt blaisdell]

Will the scorpion 5020-450 motor fit the stock motor mount. Will it mount fine

[mahbouni]

Originally Posted by matt blaisdell

Will the scorpion 5020-450 motor fit the stock motor mount. Will it mount fine

Yes it will fit the 30mm motor mount that now comes with the kit. I have the 5025-440 and I had to shave some material from the top of the frames but I think that won't be necessary with the shorter 5020-450.

[matt blaisdell]

ok i ordered my motor and i chose the Scorpion 5020-450 motor. hope its a power house. Thanks guys. i just posted pic of my logo in the pic section.

[Madryan]

I used an align MX at 470KV running 12S ... heaps of power and no issues with heat etc..using a YGE 120A ESC...

[beans07]

Ayone using a 450kv on 12s Logo600 (not SE)?

[mahbouni]

Originally Posted by beans07

Ayone using a 450kv on 12s Logo600 (not SE)?

Yes I run a Pyro 700-45 on 12s on both my 600 and 600SE.

[beans07]

So I better be more specific.

Anyone run a Scorpion HKIII 4035-450kv on 12s Logo600?

[Madryan]

@ Beans ---- Any particular reason about specific motor ? do you have issues with that motor or just looking to see what experience people are having with it...? any specific ESC associated with that as well ? pays to elaborate exactly the question you are after an answer for :-)


Cheers

[beans07]

No issue, I can get a brand new one at a really cheap price ($100 less than a 500kv). I am currently running 10s on the 560kv but need new batteries and going 12s and more efficient and less heat makes sense to me.

I was running some old tired packs on a Jive 80A and once I installed the Scorp with vbar gov the packs really started to go down hill.

For some reason 6s batteries are cheaper and easier to get (generally) than 5s packs. I guess it is they are used more commonly.

I thought by being a little lower on kv I can run a higher pinion and have more contact on the gear.

I have flown a 500kv scorp and I was happy with the power just hoping the 450kv would be the same sort of power. The other option is a 4525 Ultimate on the E7 and the 500kv to the logo.