Fun, Learning, Friendship and Mutual Respect
START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > Mikado V-BAR


Mikado V-BAR Mikado V-Stabi/V-BAR Flybarless System Software and Hardware Support


Reply
 
Thread Tools Display Modes
Old 04-16-2012, 08:25 AM   #1
hengli
Registered Users
 

Join Date: Apr 2007
Location: Taiwan
Default Vbar Gov Head Speed Control

I have 2 600 machine. Both use Vbar governor with hobbywing ESC and Hyperion sensor.
The Vbar governor works just fine.
The only problem is that Vbar gives me different headspeed every single flight.
It seems that Vbar have different rpm in each flight, depending on the battery capability.
Although the headspeed is only a little different, I can feel it.
BTW, once the rpm is determined in the beginning of taking off, I have same rpm all the flight.
The different only occures when changing the battery.
I wonder if anyone have noticed this.
And is there any upgrated from Mikado that Vbar can have remember the rpm like the Kontronik mode 11?
hengli is offline        Reply With Quote
Old 04-16-2012, 10:26 AM   #2
MrMel
V-BAR Guru
 
Posts: 13,568
 

Join Date: Apr 2005
Location: Lidingo/Stockholm, Sweden
Default

Sorry but your post does not make sense.

If you have proper gearing it will be EXACT same headspeed each flight, it does not need to remember.
That is if your requested RPM is the same and if there is headroom to hold it.

Post your Event log.
__________________
Gone fishing.. or hunting or something..

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
MrMel is offline        Reply With Quote
Old 04-16-2012, 11:23 PM   #3
hengli
Registered Users
Thread Starter Thread Starter
 

Join Date: Apr 2007
Location: Taiwan
Default

Alright, I will test fly again on the weekend and try to post the log.
Thanks for reply.
hengli is offline        Reply With Quote
Old 04-17-2012, 11:14 AM   #4
hengli
Registered Users
Thread Starter Thread Starter
 

Join Date: Apr 2007
Location: Taiwan
Default gearing

What information can I get from the event log about rpm?
I check my event log on both my heli, there is nothing about rpm.
I have healthy message for several 10 secs...

My 600E Pro gearing : 13/112T, Align 510KV 600MX motor with 12S setup
My logo 600 gearing : 11/106T, Align 530KV 700MX motor with 12S setup
I believe that both heli have proper gear ratio and have headroom for gov.
But I do feel the rpm differs from each flight.
Good thing is that the gov holds very well during one flight, from the begginning to the end.
hengli is offline        Reply With Quote
Reply




Unregistered
Go Back   HeliFreak > R/C Electronics Support > Mikado V-BAR


Mikado V-BAR Mikado V-Stabi/V-BAR Flybarless System Software and Hardware Support

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Copyright © 2004-2011 - William James - Helifreak.com