Can anyone else get inverted? - Page 2

tbullard · 04-21-2012, 06:46 PM

Quote:

Originally Posted by msrxnewb

i finally did it, two days ago.

it was pretty nerve racking. my RHK blade grips took some damage after a few attempts, had to bent it back with pliers and then it was perfect again!

Make sure you have your D/R set to 100% on Aile and Elev and also it helps to have your travel adj set to 125% on Aile and Elev. Should be no problem to make the flip with those settings.

burnoutboy · 04-23-2012, 11:01 AM

Or you could just nut up and do it with the stock TX like me LOL.

Can't wait to save enough cash for a DX6i. It should make all the dumb stuff I do so much easier. I'll be able to do even dumber stuff that this heli "can't" do.

greyhoundfan · 04-28-2012, 12:38 AM

Well, I almost did.. but I chickened out.. I got the heli as high as I could and than gave fwd command, just at the tail end of the descent it started to front end flip, I let this go for a just a second and a half and pulled out of it. I did this 3 or 4 times but didn't have the 'stuff' to fully commit..

burnoutboy · 04-28-2012, 08:33 AM

Get it higher or try a backflip. You don't need as much altitude to backflip as you do to front flip in my experience.

04-23-2012, 11:01 AM	#22
burnoutboy Registered Users Join Date: Jan 2012 Location: Baltimore, MD	Or you could just nut up and do it with the stock TX like me LOL. Can't wait to save enough cash for a DX6i. It should make all the dumb stuff I do so much easier. I'll be able to do even dumber stuff that this heli "can't" do. __________________ DSMX DX6i, MH mCX2, mSR, BL RKH mSR X, 3 X mCP X v.1 (one stocker, one destined for DBL, one destined for DBL mini130X), Lachmund mQX PM me for your soldering and mSR X BL build needs.

04-28-2012, 08:33 AM	#24
burnoutboy Registered Users Join Date: Jan 2012 Location: Baltimore, MD	Get it higher or try a backflip. You don't need as much altitude to backflip as you do to front flip in my experience. __________________ DSMX DX6i, MH mCX2, mSR, BL RKH mSR X, 3 X mCP X v.1 (one stocker, one destined for DBL, one destined for DBL mini130X), Lachmund mQX PM me for your soldering and mSR X BL build needs.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-28-2012, 12:38 AM	#23
greyhoundfan Registered Users Join Date: Mar 2012 Location: USA, CA	Well, I almost did.. but I chickened out.. I got the heli as high as I could and than gave fwd command, just at the tail end of the descent it started to front end flip, I let this go for a just a second and a half and pulled out of it. I did this 3 or 4 times but didn't have the 'stuff' to fully commit..