vertical fin

dodgeboy · 04-25-2012, 02:37 PM

anyone have a place that you can get different color fins ? are you guys using fins off another model ? i have searched fusion 50 fins and come up with only the stock one.

Wh1teAfr1can · 04-25-2012, 03:21 PM

buddy of mine has this one looks pretty sweet

http://helidirect.com/lynx-vertical-...50-p-22262.hdx

dodgeboy · 04-25-2012, 03:26 PM

looking for a set of yellow ones for the boom and tail housing. i plan on getting the ozzie canopy and that would match pretty good.

Wh1teAfr1can · 04-25-2012, 03:31 PM

you may just have to paint them urself not sure i have ever seen a yellow one. Fusuno may have them but not sure

JustPlaneChris · 04-25-2012, 03:32 PM

Just cover the stock fin with sticky-back trim Monokote material, and cut around it with a razor. That's what I've done with all my helis (in the dayglo colors). Super easy, and cheap. Visible too, especially if you put a band of the trim around the tailboom as well.

dodgeboy · 04-25-2012, 04:23 PM

Quote:

Originally Posted by Wh1teAfr1can

you may just have to paint them urself not sure i have ever seen a yellow one. Fusuno may have them but not sure

They do make what im looking for. Thanks for the tip. The one they sell is for the velocity
50. Do you know off hand it they share the same boom mount and tail housing?

dodgeboy · 04-25-2012, 04:30 PM

Never mind. I looked up the boom mount and tail housing on helidirect and they seem to all share the same parts. If anyone knows im wrong please tell me.

Slyster · 04-25-2012, 04:53 PM

Helidirect for colored blades and tail fin, skids green duct tape

dodgeboy · 04-25-2012, 05:08 PM

thats the first place i went. but under fusion 50 i found nothing like what you have. what did you look up to find those ?

maybe im just dumb

Slyster · 04-25-2012, 07:04 PM

These are after market parts

Tail blades
http://helidirect.com/advanced_searc...s=kbdd&x=0&y=0

Tail fins (most need a little modding.. like a new hole drilled)
http://helidirect.com/advanced_searc...0+fins&x=0&y=0

ChuckL · 04-25-2012, 10:22 PM

Fusuno makes fins for the Fusion/ Velocity no mods needed. They are under upgrades for the Velocity on HD. They are the same I have them on my Fusion and Velocity.

04-25-2012, 02:37 PM	#1
dodgeboy Registered Users Join Date: Nov 2011 Location: slidell, LA	vertical fin anyone have a place that you can get different color fins ? are you guys using fins off another model ? i have searched fusion 50 fins and come up with only the stock one. __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Team A-Main/ProTek Field Rep.

04-25-2012, 03:21 PM	#2
Wh1teAfr1can Registered Users Join Date: May 2011 Location: Huntsville, AL	buddy of mine has this one looks pretty sweet http://helidirect.com/lynx-vertical-...50-p-22262.hdx __________________ Team Kontronik Team minicopter Diabolo Kosmik 200, Pyro 750 - 560kv, HC3X, BLS 255/256

04-25-2012, 03:26 PM	#3
dodgeboy Registered Users Thread Starter Join Date: Nov 2011 Location: slidell, LA	looking for a set of yellow ones for the boom and tail housing. i plan on getting the ozzie canopy and that would match pretty good. __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Team A-Main/ProTek Field Rep.

04-25-2012, 03:31 PM	#4
Wh1teAfr1can Registered Users Join Date: May 2011 Location: Huntsville, AL	you may just have to paint them urself not sure i have ever seen a yellow one. Fusuno may have them but not sure __________________ Team Kontronik Team minicopter Diabolo Kosmik 200, Pyro 750 - 560kv, HC3X, BLS 255/256

04-25-2012, 03:32 PM	#5
JustPlaneChris Registered Users My HF Map location Join Date: Jul 2006 Location: Austin, TX	Just cover the stock fin with sticky-back trim Monokote material, and cut around it with a razor. That's what I've done with all my helis (in the dayglo colors). Super easy, and cheap. Visible too, especially if you put a band of the trim around the tailboom as well. Attached Thumbnails __________________ -Chris

04-25-2012, 04:30 PM	#7
dodgeboy Registered Users Thread Starter Join Date: Nov 2011 Location: slidell, LA	Never mind. I looked up the boom mount and tail housing on helidirect and they seem to all share the same parts. If anyone knows im wrong please tell me. __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Team A-Main/ProTek Field Rep.

04-25-2012, 04:53 PM	#8
Slyster Registered Users My HF Map location Join Date: May 2008 Location: Maplewood, MN	Helidirect for colored blades and tail fin, skids green duct tape __________________ It's not just a hobby... it's a lifestyle! Outrage Fusion & 550 / Goblin 700 / SK540 / Kontronik / DX8 / Quantum / RJX / 4010 Duo Pete Team Outrage.

04-25-2012, 05:08 PM	#9
dodgeboy Registered Users Thread Starter Join Date: Nov 2011 Location: slidell, LA	thats the first place i went. but under fusion 50 i found nothing like what you have. what did you look up to find those ? maybe im just dumb __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Team A-Main/ProTek Field Rep.

04-25-2012, 07:04 PM	#10
Slyster Registered Users My HF Map location Join Date: May 2008 Location: Maplewood, MN	These are after market parts Tail blades http://helidirect.com/advanced_searc...s=kbdd&x=0&y=0 Tail fins (most need a little modding.. like a new hole drilled) http://helidirect.com/advanced_searc...0+fins&x=0&y=0 __________________ It's not just a hobby... it's a lifestyle! Outrage Fusion & 550 / Goblin 700 / SK540 / Kontronik / DX8 / Quantum / RJX / 4010 Duo Pete Team Outrage.

04-25-2012, 10:22 PM	#11
ChuckL Registered Users Join Date: Jan 2007 Location: Michigan	Fusuno makes fins for the Fusion/ Velocity no mods needed. They are under upgrades for the Velocity on HD. They are the same I have them on my Fusion and Velocity.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode