Seeking Unique Blades

veloflier · 04-29-2012, 04:59 AM

I am seeking some unique 600mm blades. Anyone know where I can find some, without making them myself? Which i have thought of.

Mentalic · 04-29-2012, 07:26 PM

I have some rather unique crashed blades but I'm afraid whats left is only good for stirring paint.

ngin · 04-29-2012, 08:03 PM

Quote:

Originally Posted by veloflier

I am seeking some unique 600mm blades. Anyone know where I can find some, without making them myself? Which i have thought of.

What do you mean by "unique" in this case?

veloflier · 04-29-2012, 10:35 PM

Quote:

Originally Posted by ngin

What do you mean by "unique" in this case?

As in the color scheme of the blades.

MotorRotor · 04-30-2012, 12:44 PM

Quote:

Originally Posted by veloflier

As in the color scheme of the blades.

Would these qualify?

http://www.centuryheli.com/products/...&currentid=461

or these for night blades?

http://www.centuryheli.com/products/...&currentid=463

Down Low · 05-10-2012, 04:26 AM

SAB and SWE make some pretty sweet looking blades too.

seanh · 05-15-2012, 02:03 PM

I'd suggest just making them as you've thought of. Get you an airbrush, compressor and go to town. You'll probably have to clear coat them. Go to the paining section here and ask what those guys do.

veloflier · 05-15-2012, 11:48 PM

That is what I am going to be doing when it comes time for that. Been talking to other folks and all the blades I have seen that I like have been painted. So I will just be making my own

seanh · 05-16-2012, 10:13 AM

what about vinal? You could always find some very thin vinal and print your own.

Testers has a kit that is that thin decal material that you can use in a printer. It's not cheap but could be a place to start.

Though this stuff does have adhesive, you'd still have to clear coat them to make sure they don't peal.

willlig756 · 05-29-2012, 05:24 AM

04-29-2012, 04:59 AM	#1
veloflier Registered Users Join Date: Jan 2011 Location: Phoenix, Az.	Seeking Unique Blades I am seeking some unique 600mm blades. Anyone know where I can find some, without making them myself? Which i have thought of. __________________ Go Big or Go Home! To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Base Jumping - To instantaneously extract yourself from a sub-optimal situation, often at great risk to your personal safety, professional reputation, or social standing

04-29-2012, 07:26 PM	#2
Mentalic Registered Users My HF Map location Join Date: Apr 2008 Location: Louisiana	I have some rather unique crashed blades but I'm afraid whats left is only good for stirring paint. __________________ Wayne To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Logo 600/ Logo 600se/ Logo 700

05-10-2012, 04:26 AM	#6
Down Low Registered Users Join Date: Jan 2010 Location: Canada	SAB and SWE make some pretty sweet looking blades too. __________________ Airtronics SD10G, SK540, Novarossi .57 3DS Synergy N5c To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. MAAC #85462

05-15-2012, 02:03 PM	#7
seanh Registered Users Join Date: Feb 2007 Location: Houston	I'd suggest just making them as you've thought of. Get you an airbrush, compressor and go to town. You'll probably have to clear coat them. Go to the paining section here and ask what those guys do. __________________ X-cell Fury 90: 601/9251, 8231's Cyc; DS650; OS 91MP-6; Jr Vibe 90; OS 91RJX Pipe; Jr 8231 cyclic, 770 3D/G8900, Prfct Reg. CCPM; T-Rex 600 NP: 6965HB, 425MG Throttle GY 520/9254; OS50 Hyper,MP-5, Prfct Reg; 600E Bstx, nue1910

05-15-2012, 11:48 PM	#8
veloflier Registered Users Thread Starter Join Date: Jan 2011 Location: Phoenix, Az.	That is what I am going to be doing when it comes time for that. Been talking to other folks and all the blades I have seen that I like have been painted. So I will just be making my own __________________ Go Big or Go Home! To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Base Jumping - To instantaneously extract yourself from a sub-optimal situation, often at great risk to your personal safety, professional reputation, or social standing

05-16-2012, 10:13 AM	#9
seanh Registered Users Join Date: Feb 2007 Location: Houston	what about vinal? You could always find some very thin vinal and print your own. Testers has a kit that is that thin decal material that you can use in a printer. It's not cheap but could be a place to start. Though this stuff does have adhesive, you'd still have to clear coat them to make sure they don't peal. __________________ X-cell Fury 90: 601/9251, 8231's Cyc; DS650; OS 91MP-6; Jr Vibe 90; OS 91RJX Pipe; Jr 8231 cyclic, 770 3D/G8900, Prfct Reg. CCPM; T-Rex 600 NP: 6965HB, 425MG Throttle GY 520/9254; OS50 Hyper,MP-5, Prfct Reg; 600E Bstx, nue1910

05-29-2012, 05:24 AM	#10
willlig756 Registered Users My HF Map location Join Date: Dec 2010 Location: Atlanta, TX	Swe __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. A Main Hobbies/ProTek R/C Field Rep RotorWorkZ ):> To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode