What Mounts work for hp03t?

vic7322 · 05-03-2012, 07:51 AM

Do I absolutely have to get the Asteroid designs tail motor mount? Is anyone else using a MicroHeli metal mount or something else?

Naito · 05-03-2012, 08:18 AM

What's wrong with the astroid mount? It fits perfectly, holds the motor well, protects the wires, light weight, doesn't break and it's not expensive. I don't know of any alternatives but it seems perfect to me!

new bee · 05-03-2012, 08:22 AM

I plan on using a little heat shrink and any one of the many different 6mm mounts I have laying around.

Mega Stumbler · 05-03-2012, 08:33 AM

I put heat shrink around the motor mounting post and then inserted it into a stock boom motor mount. Works like a champ. If it comes loose I will just use a tiny dab of contact adhesive for extra friction.

coredump · 05-03-2012, 12:05 PM

The stock mount with a cage is a little bit too flexible for the heat
shrink trick. The tail fall out of the mount in mid air is not pretty.
That happen to me once and I will not use V2 tail mount on hp03t
again.

The old v1 tail mount or the msr tail mount (without the cage) is better.
Thicker plastic around the motor.

05-03-2012, 07:51 AM	#1
vic7322 Registered Users Join Date: Oct 2009 Location: Upper Marlboro	What Mounts work for hp03t? Do I absolutely have to get the Asteroid designs tail motor mount? Is anyone else using a MicroHeli metal mount or something else?

05-03-2012, 08:18 AM	#2
Naito Registered Users Join Date: Aug 2010 Location: Canada	What's wrong with the astroid mount? It fits perfectly, holds the motor well, protects the wires, light weight, doesn't break and it's not expensive. I don't know of any alternatives but it seems perfect to me! __________________ NanoCPx - Bone stock! mSRx BL - BLHeli 6.1-multi, XP3a/HP03s mCPx "stock"-BL - BLHeli 4.0, XP3a dbl-fet/C05m 8T mCPx "super"-DualBL - BLHeli 4.1, XP7a(3xFET)/HP06v2/8T, XP3a/HP03t,3xSPMSA2030L 2.3g servos

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-03-2012, 08:22 AM	#3
new bee Join Date: Jan 2012 Location: central illinios	I plan on using a little heat shrink and any one of the many different 6mm mounts I have laying around.

05-03-2012, 08:33 AM	#4
Mega Stumbler My HF Map location Join Date: Aug 2011 Location: Kansas	I put heat shrink around the motor mounting post and then inserted it into a stock boom motor mount. Works like a champ. If it comes loose I will just use a tiny dab of contact adhesive for extra friction.

05-03-2012, 12:05 PM	#5
coredump Registered Users Join Date: Apr 2009 Location: Bay area, CA	The stock mount with a cage is a little bit too flexible for the heat shrink trick. The tail fall out of the mount in mid air is not pretty. That happen to me once and I will not use V2 tail mount on hp03t again. The old v1 tail mount or the msr tail mount (without the cage) is better. Thicker plastic around the motor.