Gens Ace packs for my Logo 400.

[Bullfrog98]

Hi All,

I have been hearing quite a lot of hype lately about Gens Ace Lipo packs.

I see HobbyPartz finally have the Gens Ace 3300mah 6S1P 25C back in stock and I was thinking about ordering a few to try out.

1) First off are these packs OK for my setup? (Scorpion 4015-1070, Kontronik Jive 100LV, 19T mod 0.5 pinion and 500mm BBT Maniac blades)

2) Secondly do the Gens Ace packs really live up to all the hype?

[maarset]

Since getting gens ace for my logo 500 I miss shopping and researching lipo's. Get it?

6s 3300 for a logo 400 swinging 500mm blades might be too small. I would use bigger packs. 3800 or 4000 6s


Sent from my iPad using Tapatalk HD

[belcom]

3300mah fit good and work great. I was using Edge 523mm blades (Logo 10 stretch) with a 2000w and getting 4:30min with 20% left. Head speed was 2200 as I far as I remember.

[Bullfrog98]

Thanks guys, I'm going to give these a try.

My setup is similar to belcom's, just a little toned down and I'm getting 5 min on some old Zippy Flightmax 3000mah 20C packs so I'm hoping the 3300mah Gens Ace packs are going to give me a bit of a boost.

Maarset what packs are you running in your 500?

[blueprint]

i was using gensace 3300's on my 400 before i absolutely destroyed the helicopter.

[maarset]

Originally Posted by Bullfrog98

Thanks guys, I'm going to give these a try.

My setup is similar to belcom's, just a little toned down and I'm getting 5 min on some old Zippy Flightmax 3000mah 20C packs so I'm hoping the 3300mah Gens Ace packs are going to give me a bit of a boost.

Maarset what packs are you running in your 500?

I'm running the 30C 5300 6S Gens Ace. But the 5500 6S would probably be a better fit. I can't go past the pinion with the 5300's

[bluepilot2003]

I am researching for my next heli... I am looking for a heli that uses 6s 4000 packs. Looks like the Logo 400 will fit this bill?

[maarset]

Be a tight fit. Logo 500 with 523's might be better.


Sent from my iPhone using Tapatalk

[Bullfrog98]

I also doubt 4000mah 6s packs are going to fit in a Logo 400.

I ordered some Gens Ace 3800mah packs for my Logo 400 and they won't fit without some cutting (they are an odd size though).

About the biggest pack I managed to fit in my 400 where Hobby King Rhino 3800mah 6s packs.

[chopstick]

I use 3300 pack's from Desirepower. Weight just below 500g.

[Ricci]

I'm running the Thor 6S 3800 mAh on my L400 and there are a perfect fit.

http://www.readyheli.com/TH380045C6S...k_p_40323.html

Ricci.