New to Synerg, N5c, and Nitro

[drdispatch]

Last stint in nitro was these early 90s on planks. I was in middle school so my father did most of the break in and tuning so eh..you could just chalk me up to next to no experience.

I'm getting a shopping list together and realize there will be tools/supplies I need that an electric person just may not have.

I play to try one of the tried and true setups with an OS, probably that 55hz. No idea on pipe, I see the synergy forum and here at HF I can find many pipe/motor combos so that's not an issue.

So I'm going to need:

Starter/wand - looking that the Align
Pushglow looks nice
glow plugs
fuel pump/container - we used a field box with an electric pump and a backup hand pump back in the day
Fuel, all we have local is 30%, I need to find out if i need less
glow wrench I can fit up in there?
fuel tube, ordered some from hd last night
Those pinch shut off clamps to cut fuel.

What am I missing? I want to get those 'little' items out of the way now while I save for the motor.

Planning on the OS55, Futaba HV setup, 9650 throttle, CGY750 and it's gov, Rail tails/mains.

Planned studying the SmacktalkRC nitro video, Finless's nitro 101, looking up nitro throttle curves, etc.

[frypan]

Looks like you have a good list, I cant personally think of anything else you would need.
Oh I just did A boto sizer for the links.

[drdispatch]

I actually grabbed myself a Boto sizer last month to size another heli

[frypan]

Fuel filters, and a fuel stopper.
http://helidirect.com/great-planes-a...s-2-p-4291.hdx
-------------------------------------------------------
This will make sure your engine gets fuel throughout most of the flight.
http://helidirect.com/omi-eld-fuel-magnet-p-7658.hdx
-----------------------------------------------------------------------
and the fuel filter.
http://helidirect.com/align-3-way-fu...00n-p-6425.hdx
---------------------------------
I'll let you know if I think of anything else