Scratch building 1/4 scale Bell 206B, 206L and 407 fuselages - Page 24

DKTek · 01-02-2012, 11:34 AM

BTW- are they painted or raw when shipped?

satsuma · 01-02-2012, 02:33 PM

gelcoat free natural glass finish, unprimed or painted, the BEST way, saves weight, gel is heavy if applied too thick.

George, whats the crack with the mechanics for these birds, MAY be easier to fabricate a set up, as it would be a shame to fit mechs that encroach into the cabin area.

MattJenner · 01-04-2012, 02:36 PM

Will you ever do a 1/5th scale Longranger ? as it will fit my zealous mechanics perfectly and have all the best scale detailing..

What would you require as a minimum order to do 1/5th scale version of 206L

Matt

Rotor George · 01-04-2012, 05:53 PM

Thanks again for all your kind words guys.

@Dan, the static rotor head parts come raw and need to be primed and painted, similar to the other resins cast parts in the kit.

@Stats, my fuselages are primed with an epoxy primer which only needs to be scuffed, de-greased then is can be painted. Was told several sets of mechanics will ship soon, we'll see.

@Matt, sorry at this time I have no plans to do anything smaller then 1/4 scale. That Zealous should fit in a 1/4 scale fuse no problem, would only need to extend the TR drive shaft.

MattJenner · 01-05-2012, 11:58 AM

hi George,

It was worth a try, I know the zealous will fit I have managed to get hold of the right length main shaft, and tail drive.
It is just 1/4 scale is too big and impracticle for transportation, and trying to work on such a large model in a normal home is a NO NO, 1/5 scale is big but not too big, and can be easily transported and lifted to the flight line..
Hence the reason for asking..

It was worth a try, will be interested in the mechanics..

Matt

satsuma · 01-06-2012, 09:58 AM

Epoxy primed, better still, ready to go

Rotor George · 02-17-2012, 04:28 PM

Here's my finished static 1/4 scale Bell 407 rotor head. As with anything I make, it has way too many parts. lol

Skiddz · 02-17-2012, 04:48 PM

Gorgeous!!

Now to make it functional.

DKTek · 02-29-2012, 10:16 PM

Check this out!

satsuma · 03-01-2012, 09:23 AM

Stunning, does what it should LOOKS REAL

Rotor George · 03-13-2012, 05:22 PM

Quote:

Originally Posted by satsuma

Stunning, does what it should LOOKS REAL

Hey Stats, now these are real! (206 blades)

Wish you lived closer to me, I'd bring them over to your shop for a nice new paint job.

Elios000 · 03-13-2012, 07:37 PM

still want to see the guts and see it fly lol

Rotor George · 03-13-2012, 08:03 PM

Quote:

Originally Posted by Elios000

still want to see the guts and see it fly lol

Here's the guts. But I just make fuselages.

Shafto · 03-13-2012, 08:31 PM

Quote:

Originally Posted by Rotor George

Hey Stats, now these are real! (206 blades)

Wish you lived closer to me, I'd bring them over to your shop for a nice new paint job.

are those older serial numbered blades? They dont have the inboard tab

Elios000 · 03-13-2012, 08:58 PM

Quote:

Originally Posted by Rotor George

Here's the guts. But I just make fuselages.

i love to see a build of one ie putting the guts in head setup man that is some beefy links on that too
what kind of servos do you put in some thing like that

Rotor George · 03-14-2012, 07:36 AM

Quote:

Originally Posted by Shafto

are those older serial numbered blades? They dont have the inboard tab

Yup, good eye.

Hauer Helicopter · 05-04-2012, 10:57 AM

Hello All,

It has been a long while since our last update, but we are back to fabricating mechanics for SuperScaleHelis fuselages. Our next batch will consist of a larger volume so as to maintain a steady stock and be able to fulfill any potential requests "off-the-shelf." Please refer to our website: link under "Latest" How it’s made (Part 1) – Hauer-Bell Mechanics 2.0
or use the URL below to see a sample set of parts for the batch we are currently working on. The parts reflect an unfinished state, they are yet to be cleaned, prepared for the anodizing process, and then anodized.

Thank you for those still following this thread, a mechanics build thread will follow shortly.

Kind Regards,
Istvan Hauer
HauerHelicopter

http://hauerhelicopter.com/2012/05/h...mechanics-2-0/

Hauer Helicopter · 05-06-2012, 11:35 AM

Hello All,

Just in case, I have posted the images below as-well.

Kind Regards,
Istvan Hauer
Hauer Helicopter

Hauer Helicopter · 05-06-2012, 11:37 AM

...and a few more...

Rotor George · 08-10-2012, 05:54 PM

Hi Guys,

At Heli Expo 2011 here in Orlando, Bell Helicopter unveiled the Bell 407GX. In short, it's a Bell 407 equipped with dual Garmin displays and some "other cool features"

You all know me by now, I had to replicate this in 1/4 scale, then take it to the next level.

Here's a "spy photo" of my hand crafted accurate 1/4 scale version of the Bell 407GX Instrument Panel. The exterior details of the Super Scale Helis Bell 407GX will also be replicated, after all it is "Super Scale".

Will the displays actually display digital animated images? You'll have to wait and see.

George

01-02-2012, 11:34 AM	#461
DKTek Registered Users My HF Map location Join Date: Apr 2006 Location: Melbourne, FL	BTW- are they painted or raw when shipped? __________________ The beatings will continue until morale improves...

01-02-2012, 02:33 PM	#462
satsuma Registered Users Join Date: Mar 2008 Location: UK	gelcoat free natural glass finish, unprimed or painted, the BEST way, saves weight, gel is heavy if applied too thick. George, whats the crack with the mechanics for these birds, MAY be easier to fabricate a set up, as it would be a shame to fit mechs that encroach into the cabin area. __________________ Regards Sats

01-04-2012, 02:36 PM	#463
MattJenner Registered Users Join Date: Jul 2011 Location: Kent	Will you ever do a 1/5th scale Longranger ? as it will fit my zealous mechanics perfectly and have all the best scale detailing.. What would you require as a minimum order to do 1/5th scale version of 206L Matt __________________ Have Fun To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

01-04-2012, 05:53 PM	#464
Rotor George Registered Users Thread Starter Join Date: Nov 2008 Location: Tampa, FL	Thanks again for all your kind words guys. @Dan, the static rotor head parts come raw and need to be primed and painted, similar to the other resins cast parts in the kit. @Stats, my fuselages are primed with an epoxy primer which only needs to be scuffed, de-greased then is can be painted. Was told several sets of mechanics will ship soon, we'll see. @Matt, sorry at this time I have no plans to do anything smaller then 1/4 scale. That Zealous should fit in a 1/4 scale fuse no problem, would only need to extend the TR drive shaft. Last edited by Rotor George; 01-06-2012 at 06:30 AM..

01-05-2012, 11:58 AM	#465
MattJenner Registered Users Join Date: Jul 2011 Location: Kent	hi George, It was worth a try, I know the zealous will fit I have managed to get hold of the right length main shaft, and tail drive. It is just 1/4 scale is too big and impracticle for transportation, and trying to work on such a large model in a normal home is a NO NO, 1/5 scale is big but not too big, and can be easily transported and lifted to the flight line.. Hence the reason for asking.. It was worth a try, will be interested in the mechanics.. Matt __________________ Have Fun To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

01-06-2012, 09:58 AM	#466
satsuma Registered Users Join Date: Mar 2008 Location: UK	Epoxy primed, better still, ready to go __________________ Regards Sats

02-17-2012, 04:28 PM	#467
Rotor George Registered Users Thread Starter Join Date: Nov 2008 Location: Tampa, FL	1/4 scale Bell 407 rotor head Here's my finished static 1/4 scale Bell 407 rotor head. As with anything I make, it has way too many parts. lol

02-17-2012, 04:48 PM	#468
Skiddz HF Support My HF Map location Join Date: May 2006 Location: Carlsbad, CA (USA)	Gorgeous!! Now to make it functional. __________________ -Kevin No helicopters were harmed in the creation of this post. AMA CD # 7309, Turbine Waiver# RW 890 To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

02-29-2012, 10:16 PM	#469
DKTek Registered Users My HF Map location Join Date: Apr 2006 Location: Melbourne, FL	Check this out! Attached Thumbnails __________________ The beatings will continue until morale improves...

03-01-2012, 09:23 AM	#470
satsuma Registered Users Join Date: Mar 2008 Location: UK	Stunning, does what it should LOOKS REAL __________________ Regards Sats

03-13-2012, 07:37 PM	#472
Elios000 Registered Users Join Date: Jun 2007 Location: Springfield MO	still want to see the guts and see it fly lol __________________ DX8 mSR, T-rex 500ESP 3G, Compass 6HV Savox servos Vbar 5.3Pro Rail Blades AMA#948801

05-04-2012, 10:57 AM	#477
Hauer Helicopter Registered Users Join Date: Feb 2010 Location: Massachusetts	Hello All, It has been a long while since our last update, but we are back to fabricating mechanics for SuperScaleHelis fuselages. Our next batch will consist of a larger volume so as to maintain a steady stock and be able to fulfill any potential requests "off-the-shelf." Please refer to our website: link under "Latest" How it’s made (Part 1) – Hauer-Bell Mechanics 2.0 or use the URL below to see a sample set of parts for the batch we are currently working on. The parts reflect an unfinished state, they are yet to be cleaned, prepared for the anodizing process, and then anodized. Thank you for those still following this thread, a mechanics build thread will follow shortly. Kind Regards, Istvan Hauer HauerHelicopter http://hauerhelicopter.com/2012/05/h...mechanics-2-0/

05-06-2012, 11:35 AM	#478
Hauer Helicopter Registered Users Join Date: Feb 2010 Location: Massachusetts	Hello All, Just in case, I have posted the images below as-well. Kind Regards, Istvan Hauer Hauer Helicopter Attached Thumbnails

05-06-2012, 11:37 AM	#479
Hauer Helicopter Registered Users Join Date: Feb 2010 Location: Massachusetts	...and a few more... Attached Thumbnails

08-10-2012, 05:54 PM	#480
Rotor George Registered Users Thread Starter Join Date: Nov 2008 Location: Tampa, FL	Super Scale Bell 407GX Hi Guys, At Heli Expo 2011 here in Orlando, Bell Helicopter unveiled the Bell 407GX. In short, it's a Bell 407 equipped with dual Garmin displays and some "other cool features" You all know me by now, I had to replicate this in 1/4 scale, then take it to the next level. Here's a "spy photo" of my hand crafted accurate 1/4 scale version of the Bell 407GX Instrument Panel. The exterior details of the Super Scale Helis Bell 407GX will also be replicated, after all it is "Super Scale". Will the displays actually display digital animated images? You'll have to wait and see. George Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode