Shaking Lama 400D

Krazydy1 · 05-08-2012, 10:41 PM

Hi Guys, I'm a Noob to the RC Heli world and went from a Nano Coaxial to a Brand new Walkera Lama 400D. I took her out for her first flight and low and behold a random gust of wind forces her down from about 3 feet and she broke only 1 blade. After replacing the one blade she now shakes violently and wont take off. I looked at the gears and it seems OK and the flybar looks straight. I also made sure the blades were nice and loose. I have 0 RC Heli repair experience so i Will take any suggestions please. I orders a new Airy Turbo shaft to help avoid blade strikes and new gears just in case. I desperate need help with this. Thanks in advance

hilo69 · 05-13-2012, 10:14 PM

hey i would check the fly bar get a new one! its very important the shaft could be bent check all screws on blade grips and heli ! hope this helps? let us no wats up?

john aeras · 05-14-2012, 09:41 AM

Did you check if the main shaft is bent? ou can do this by rolling the main shaft a sheet of glass.

05-08-2012, 10:41 PM	#1
Krazydy1 Registered Users Join Date: May 2012 Location: Santa Clarita, CA	Shaking Lama 400D Hi Guys, I'm a Noob to the RC Heli world and went from a Nano Coaxial to a Brand new Walkera Lama 400D. I took her out for her first flight and low and behold a random gust of wind forces her down from about 3 feet and she broke only 1 blade. After replacing the one blade she now shakes violently and wont take off. I looked at the gears and it seems OK and the flybar looks straight. I also made sure the blades were nice and loose. I have 0 RC Heli repair experience so i Will take any suggestions please. I orders a new Airy Turbo shaft to help avoid blade strikes and new gears just in case. I desperate need help with this. Thanks in advance

05-14-2012, 09:41 AM	#3
john aeras Registered Users Join Date: Nov 2008 Location: Canada	Did you check if the main shaft is bent? ou can do this by rolling the main shaft a sheet of glass. __________________ *Some people have a problem for every solution...*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-13-2012, 10:14 PM	#2
hilo69 Registered Users Join Date: Feb 2011 Location: fountain valley ,ca	hey i would check the fly bar get a new one! its very important the shaft could be bent check all screws on blade grips and heli ! hope this helps? let us no wats up?