Fun, Learning, Friendship and Mutual Respect
START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Blade Helicopters (eFlite) > mCP X Brushless Mods


mCP X Brushless Mods Blade Micro CPx Brushless Mods and Conversions


Reply
 
Thread Tools Display Modes
Old 05-09-2012, 07:22 AM   #1
mattijs
Registered Users
 

Join Date: Sep 2006
Location: Belgium
Default Anybody did a LIPO to fixed 4.x V up convertor switching regulator?

I've seen a 10A switching regulator being used to do 2s to 4.5V..which i liked and would probably try at one point if i had a lot of say 320 packs...Sadly...well it's not that sad but i have 6 550 Hyperions coming in so it probably wouldn't be a good idea to fly with 2s 550 packs on a HP05...so that's why i was thinking about maybe making a switching booster circuit.

With all the governor stuff with the flashed esc's etc...there is probably little benefit to doing it for the mins but i still like the idea of having boosted servo and tail power. Maybe doing a booster where only the 3-in-1 and the tail is fed the higher voltage and the main motor's esc just gets the battery's voltage connected to it.
mattijs is offline        Reply With Quote
Reply




Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Blade Helicopters (eFlite) > mCP X Brushless Mods


mCP X Brushless Mods Blade Micro CPx Brushless Mods and Conversions

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Copyright © 2004-2011 - William James - Helifreak.com