 |
|
| Register | FAQ | PM | News | Events | Groups | Blogs | Calendar | Mark Forums Read |
 |
|
Unregistered
|
||||||
| Main Forum - Helicopter Talk R/C Helicopters and the people who fly them. VENDOR TOPICS DO NOT GO HERE. Full Scale Heli threads go in OT please |
|
|
 |
|
|
Thread Tools | Display Modes |
05-11-2012, 09:42 PM
|
#1 |
|
Registered Users
Join Date: Mar 2011
Location: Kensington, Maryland
|
Washers with main blade screws?
Is anyone using washers with the main blade screws? I do not mean spacers for the blades. I mean washers that would sit outside the blade grips that would protect the blade grips when the screw is tightened. My blade grips have circular marks from the screw, and I am wondering if properly sized washers may be a good idea. Any detrimental consequences from using washers in this application?
__________________
Whiplash E, Synergy E5/S (my favorite), Synergy E5 (building), T-Rex 550, TT Mini Titan v2 (building), B130X, mCPx VBar Silverline x4, DX8, Sims: Aerofly5.7 /RF6.5/Phoenix 4 |
|
|
|
«
Previous Thread
|
Next Thread
»
|
|
|
Unregistered
|
||||||
| Main Forum - Helicopter Talk R/C Helicopters and the people who fly them. VENDOR TOPICS DO NOT GO HERE. Full Scale Heli threads go in OT please |
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
