Metal Tail blade grip assembly

Raydee · 05-06-2012, 11:08 PM

http://helidirect.com/rg50560-ss-out...bly-p-7401.hdx
Does anyone have one of these that they can part with?

<3My480Pro · 05-07-2012, 03:15 AM

LOL wow you're in luck. I have a used set if you're interested

Raydee · 05-07-2012, 08:37 AM

Sent you a PM.

Raydee · 05-09-2012, 04:31 PM

Still on the hunt.

s0laris · 05-10-2012, 09:31 AM

I hope you find a set soon. I have extra but I love the g5 too much to give them up. Sorry

maybe an align set can be retrofitted ?

Raydee · 05-10-2012, 09:33 AM

Actually the POS Align is what I am trying to replace so I can have a flyable heli.

s0laris · 05-10-2012, 09:51 AM

Ahh ok.

What about beam ? Also very good

Raydee · 05-10-2012, 09:59 AM

Honestly I looked at the Beam tail and while it may use better bearings it looks like the exact same design as the Trex tail. The smaller outer bearing is not supported on the Align and they keep failing on me and others.

s0laris · 05-10-2012, 10:28 AM

heh there is some irony here.

If I recall the Outrage tail grips were breaking down do to the high rpms people were subjecting them to on the g5.

Mind you the gearing ratio is different on the align 450 so It is prob not a factor in this case.

You may want to reconsider the beam one.

Look at this video!

YouTube

scott s · 05-18-2012, 02:57 PM

I use the g5 tail on my custom stretch 450 however due to the horror stories about stock g5 grips coming apart at high tail speed I use the trex pro 450 tail grips and hub with the integrated chinese weights. No problems yet and I run a 5 to1 tail gear ratio. The problem is you will need to use a small washer or 2 on each grip to slider pitch arm to space them correctly so they do not bind. On the other hand I once crahed and had to put the stock g5 grips and hub on for a while and they held the high rpm tail ratio just fine so probably just an improvement in bearings. Take a look at the minititan v2 tail grips and hub also as that tail from cnc heli looks identical to a g5 tail assembly. The difference being that the tail case center is bored for a 14mm od boom but every thing else looks identical. The outrage g5 tail is the hot swap for trex owners and beam owners. Sure wish someone would get off their butt and provide these things as eveyone and their brother wants one.

05-06-2012, 11:08 PM	#1
Raydee Registered Users My HF Map location Join Date: Dec 2006 Location: Buffalo, NY	Metal Tail blade grip assembly http://helidirect.com/rg50560-ss-out...bly-p-7401.hdx Does anyone have one of these that they can part with? __________________ Logo 500se VBar Pro 5.3 Align Trex 700 DFC HV Vbar Pro 5.3 Align Trex 500 EFL Pro Mini Vbar 5.3 Outrage Fusion 50 6s Vbar Pro 5.3

05-07-2012, 08:37 AM	#3
Raydee Registered Users Thread Starter My HF Map location Join Date: Dec 2006 Location: Buffalo, NY	Sent you a PM. __________________ Logo 500se VBar Pro 5.3 Align Trex 700 DFC HV Vbar Pro 5.3 Align Trex 500 EFL Pro Mini Vbar 5.3 Outrage Fusion 50 6s Vbar Pro 5.3

05-09-2012, 04:31 PM	#4
Raydee Registered Users Thread Starter My HF Map location Join Date: Dec 2006 Location: Buffalo, NY	Still on the hunt. __________________ Logo 500se VBar Pro 5.3 Align Trex 700 DFC HV Vbar Pro 5.3 Align Trex 500 EFL Pro Mini Vbar 5.3 Outrage Fusion 50 6s Vbar Pro 5.3

05-10-2012, 09:31 AM	#5
s0laris Registered Users Join Date: Sep 2006 Location: canada	I hope you find a set soon. I have extra but I love the g5 too much to give them up. Sorry maybe an align set can be retrofitted ? __________________ Outrage 550, Goblin 630, 700, warp 360, Dual BL Mcpx, 130x When you start to be in complete control reflexes are not a requirement.

05-10-2012, 09:33 AM	#6
Raydee Registered Users Thread Starter My HF Map location Join Date: Dec 2006 Location: Buffalo, NY	Actually the POS Align is what I am trying to replace so I can have a flyable heli. __________________ Logo 500se VBar Pro 5.3 Align Trex 700 DFC HV Vbar Pro 5.3 Align Trex 500 EFL Pro Mini Vbar 5.3 Outrage Fusion 50 6s Vbar Pro 5.3

05-07-2012, 03:15 AM	#2
<3My480Pro Registered Users Join Date: Jan 2011 Location: Garden Grove, California	LOL wow you're in luck. I have a used set if you're interested

05-10-2012, 09:51 AM	#7
s0laris Registered Users Join Date: Sep 2006 Location: canada	Ahh ok. What about beam ? Also very good __________________ Outrage 550, Goblin 630, 700, warp 360, Dual BL Mcpx, 130x When you start to be in complete control reflexes are not a requirement.

05-10-2012, 09:59 AM	#8
Raydee Registered Users Thread Starter My HF Map location Join Date: Dec 2006 Location: Buffalo, NY	Honestly I looked at the Beam tail and while it may use better bearings it looks like the exact same design as the Trex tail. The smaller outer bearing is not supported on the Align and they keep failing on me and others. __________________ Logo 500se VBar Pro 5.3 Align Trex 700 DFC HV Vbar Pro 5.3 Align Trex 500 EFL Pro Mini Vbar 5.3 Outrage Fusion 50 6s Vbar Pro 5.3

05-18-2012, 02:57 PM	#10
scott s Registered Users Join Date: Apr 2010 Location: malabar fl	I use the g5 tail on my custom stretch 450 however due to the horror stories about stock g5 grips coming apart at high tail speed I use the trex pro 450 tail grips and hub with the integrated chinese weights. No problems yet and I run a 5 to1 tail gear ratio. The problem is you will need to use a small washer or 2 on each grip to slider pitch arm to space them correctly so they do not bind. On the other hand I once crahed and had to put the stock g5 grips and hub on for a while and they held the high rpm tail ratio just fine so probably just an improvement in bearings. Take a look at the minititan v2 tail grips and hub also as that tail from cnc heli looks identical to a g5 tail assembly. The difference being that the tail case center is bored for a 14mm od boom but every thing else looks identical. The outrage g5 tail is the hot swap for trex owners and beam owners. Sure wish someone would get off their butt and provide these things as eveyone and their brother wants one.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode