Tail rotor size

SMarvin · 05-21-2012, 10:16 PM

I have been trying to do some research and I can't find anything specific...

Anyone know what size tail rotor blades the 450X can handle. No where lists the specs on the stock and I don't have anything I can reliably meaure it with atm.

Thanks!

TheHeliDude · 05-22-2012, 01:10 AM

People are using 59 and 61mm KBDD tail blades. You might check if you get tail wag in backwards flight and turn the gyro gain down half a percent or 1%. That's what it took for me, although I think I had that problem even with stock tail blades.

05-21-2012, 10:16 PM	#1
SMarvin Registered Users Join Date: Mar 2012 Location: Oregon	Tail rotor size I have been trying to do some research and I can't find anything specific... Anyone know what size tail rotor blades the 450X can handle. No where lists the specs on the stock and I don't have anything I can reliably meaure it with atm. Thanks! __________________ Compass Warp 360 (AR7200BX, HW 40A platinum pro, Savox 0257/1257mg) - Compass 6HV (AR7200BX, SAVOX 1258TG/1290MG, all else stock) - DX6i

05-22-2012, 01:10 AM	#2
TheHeliDude Registered Users Join Date: Jul 2011 Location: Orange County	People are using 59 and 61mm KBDD tail blades. You might check if you get tail wag in backwards flight and turn the gyro gain down half a percent or 1%. That's what it took for me, although I think I had that problem even with stock tail blades. __________________ Blade Mcpx - Spin 16.3 - all MicroHeli Blade Mcpx BL, Blade 130X - HP08 Blade 450X - Scorp 2221-6 DJI F450 Naza, Trex 500 DFC

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode