autoratation gear

jrbrandon · 05-25-2012, 02:07 PM

hi, and thanks for all your help before. have a new problem. building this 600pro and when i install the gears on the heli the autoratation didn't make contact with the tail gear. has gap of about 1/16 to 1/8 . check part # and thats what the y call for. any help would be grateful. thank you and have fun flying.

350Z_Al · 05-25-2012, 02:15 PM

Post pics

jrbrandon · 05-26-2012, 02:23 PM

thanks for your reply. before i do that i order a grear with the front gear for the front torque tube. going to try that and see what happens. again thank you for your quick reply. as i said before you guys are great.

levpardede · 05-26-2012, 07:21 PM

what do you mean by auto gear not contact with horisontal front T/T,
is it not perfectly align? play with provided shim on a upper mainshaft or in the OWB case, mine actually not perfectly align at anyway.
that's why this bird called ALIGN

hope this help
lev

05-25-2012, 02:07 PM	#1
jrbrandon Registered Users Join Date: Feb 2011 Location: brooksville.fl	autoratation gear hi, and thanks for all your help before. have a new problem. building this 600pro and when i install the gears on the heli the autoratation didn't make contact with the tail gear. has gap of about 1/16 to 1/8 . check part # and thats what the y call for. any help would be grateful. thank you and have fun flying.

05-25-2012, 02:15 PM	#2
350Z_Al Registered Users Join Date: Mar 2011 Location: Winnipeg, MB, Canada	Post pics __________________ Align 450 PRO DFC 4S KDE 450XF // Blade 450X 450MX, 3GX, Savox // Align 450 Sport V2 Airwolf Align 600EFL PRO, DFC, 3GX, KDE Align CHP DL 800, XERA 4530LE, ICE160HV, AR7200BX, SB-2271MG, SB-2272SG, KDE, Lynx, 115s Thunder Power 65C LiPo & JR 12X

05-26-2012, 02:23 PM	#3
jrbrandon Registered Users Thread Starter Join Date: Feb 2011 Location: brooksville.fl	thanks thanks for your reply. before i do that i order a grear with the front gear for the front torque tube. going to try that and see what happens. again thank you for your quick reply. as i said before you guys are great.

05-26-2012, 07:21 PM	#4
levpardede Registered Users Join Date: Nov 2010 Location: jakarta	what do you mean by auto gear not contact with horisontal front T/T, is it not perfectly align? play with provided shim on a upper mainshaft or in the OWB case, mine actually not perfectly align at anyway. that's why this bird called ALIGN hope this help lev __________________ Trex 700e Vbar 5.3pro, 750MX 530kv JR260Z gasser dji ace one, Trex 450 pro flybar, Futaba 8FGS.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode