How do i bind normal rx?

mrultralite · 05-31-2012, 04:14 PM

trying to bind an aR 6100e , but the RX to GT5 connections seem to preclude the use of the bind plug i. I've tried a number of combos , each time the AR6100 light goes steady like its binded but then when i turn it back on it isn't

Tried binding the RX separately and through the GT5
Closest i've got is w/ the esc plugged into the GT5 [freeing up the Batt. post on the ar6100 for the bind plug] , then binding through the GT5 , when done the RX light is steady but its still not bound.

Still not sure of right proceedure even.
still binds to a sat.

not sure if i should still be binding in Spektrum mode w/ normal Rx?

mrultralite · 05-31-2012, 09:26 PM

FRom TT , thanks guys;

Please bind your transmitter and receiver first. Then connect 3 wires from the receiver to the GT5 per the manual and set up the "receiver" to be 5ch on the GT5.

mrultralite · 06-01-2012, 09:34 PM

Got it going, had to experiment all morning to get the RX - GT5 plugs in right spots.

everything seems to be working on test stand [ i had to rest everything], but those lights in the 'gain ' column blink alot and total gain seems to be zero now or nor registering, plus the RC indicator is now an ''!''.

I now have 'failsafe'!

mrultralite · 06-02-2012, 02:22 PM

Flew it and the I d-stick was now way off [low] nearly uncontrollable

05-31-2012, 04:14 PM	#1
mrultralite Registered Users Join Date: Jun 2011 Location: Abbotsford BC canada	How do i bind normal rx? trying to bind an aR 6100e , but the RX to GT5 connections seem to preclude the use of the bind plug i. I've tried a number of combos , each time the AR6100 light goes steady like its binded but then when i turn it back on it isn't Tried binding the RX separately and through the GT5 Closest i've got is w/ the esc plugged into the GT5 [freeing up the Batt. post on the ar6100 for the bind plug] , then binding through the GT5 , when done the RX light is steady but its still not bound. Still not sure of right proceedure even. still binds to a sat. not sure if i should still be binding in Spektrum mode w/ normal Rx? Last edited by mrultralite; 05-31-2012 at 05:58 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-31-2012, 09:26 PM	#2
mrultralite Registered Users Thread Starter Join Date: Jun 2011 Location: Abbotsford BC canada	FRom TT , thanks guys; Please bind your transmitter and receiver first. Then connect 3 wires from the receiver to the GT5 per the manual and set up the "receiver" to be 5ch on the GT5.

06-01-2012, 09:34 PM	#3
mrultralite Registered Users Thread Starter Join Date: Jun 2011 Location: Abbotsford BC canada	Got it going, had to experiment all morning to get the RX - GT5 plugs in right spots. everything seems to be working on test stand [ i had to rest everything], but those lights in the 'gain ' column blink alot and total gain seems to be zero now or nor registering, plus the RC indicator is now an ''!''. I now have 'failsafe'!

06-02-2012, 02:22 PM	#4
mrultralite Registered Users Thread Starter Join Date: Jun 2011 Location: Abbotsford BC canada	Flew it and the I d-stick was now way off [low] nearly uncontrollable