You guys think all swash levelers are the same...think again

ClubCRASH · 06-09-2012, 02:59 PM

FBL Rotors took a good tool and somehow made it even better. Ralph is the man for this type of thing, even if you already have a swash leveler you should think about getting on of these.

Chris Sexton · 06-09-2012, 07:53 PM

Used mine to do my setup and set phasing today. Works great

BennyTRD · 06-09-2012, 09:07 PM

That's a nice piece for sure. Great idea!

mu300pilot · 06-11-2012, 05:08 AM

A Picture would be nice

WBFines · 06-11-2012, 05:31 AM

http://www.fblrotors.com/FBL-Swashpl...der_p_440.html

Powered by Apple

povern · 06-11-2012, 06:24 AM

$43.

What is different about it to make it better?

I'm all for cool tools to help set up the heli, but I do not see anything special about this one except the price.

Chris Sexton · 06-11-2012, 08:53 AM

The "special" is that it has a built in phase tool for the floating wash out base. You simply put the jesus bolt for the head in, and push the washout base up into the tool. It will hold it square so you can tighten the clamp on the washout. This will get you perfect phasing every time.

I used mine on Saturday, and it tracks perfectly in a loop.

drdispatch · 06-11-2012, 09:09 AM

It's high quality, works on the N5c/E7/E7, and gets the phasing arms perfect.

povern · 06-11-2012, 12:46 PM

Quote:

Originally Posted by cdsexton

The "special" is that it has a built in phase tool for the floating wash out base. You simply put the jesus bolt for the head in, and push the washout base up into the tool. It will hold it square so you can tighten the clamp on the washout. This will get you perfect phasing every time.

I used mine on Saturday, and it tracks perfectly in a loop.

now that is cool.

What size main shAft is the synergy?

bart2546 · 06-11-2012, 12:48 PM

I ordered one last week and it should be here today. Can't wait. Even though my N5c flies just fine now, I'm going to go through and set it up again in the head with this nifty little tool.

Regards,
Brandon Bartolomucci
Sent from my iPhone

felborn · 06-11-2012, 12:51 PM

Phasing arm? Thats nostalgic

beeflyer2 · 06-12-2012, 08:52 AM

Quote:

Originally Posted by povern

now that is cool.

What size main shAft is the synergy?

10mm

povern · 06-12-2012, 11:20 AM

Quote:

Originally Posted by beeflyer2

10mm

I wonder if I could use it on my Logo?

Chris Sexton · 06-12-2012, 11:51 AM

Quote:

Originally Posted by povern

I wonder if I could use it on my Logo?

I doubt this unit could be used because it is milled to the exact shape and demensions of the Synery Washout. But the concept could be adapted to any make/model with a floating swash driver.

bart2546 · 06-13-2012, 01:42 PM

Got mine in. Amazing little tool one of the best 40 bucks I e spent tool wise in the hobby. Worked like a charm. I highly recommend this tool if you own a Synergy.

Regards,
Brandon Bartolomucci
Sent from my iPhone

4cyclic · 06-13-2012, 08:15 PM

Got mine too, very nicely made and shiny !

cmezip · 06-21-2012, 01:48 PM

I think I will have to get me one of these.

Sent from my SPH-D710 using Tapatalk 2

06-09-2012, 02:59 PM	#1
ClubCRASH Registered Users Join Date: Dec 2010 Location: Canada	You guys think all swash levelers are the same...think again FBL Rotors took a good tool and somehow made it even better. Ralph is the man for this type of thing, even if you already have a swash leveler you should think about getting on of these. __________________ Team Synergy, Canada Team Scorpion motors Team Pulse batteries

06-09-2012, 07:53 PM	#2
Chris Sexton Registered Users My HF Map location Join Date: Feb 2011 Location: Columbus, Ohio	Used mine to do my setup and set phasing today. Works great __________________ Team Synergy/Team Scorpion

06-09-2012, 09:07 PM	#3
BennyTRD Registered Users My HF Map location Join Date: Jul 2008 Location: Saskatchewan, Canada	That's a nice piece for sure. Great idea! __________________ Logo 600SE - 12S, 693's, VBar ---- Logo 6003D - 12S, 623's, VBar Logo 400SE - - 6S, 473's, VBar-------Raptor E720 - 12S, 713's, VBar

06-11-2012, 05:31 AM	#5
WBFines Registered Users Join Date: Nov 2010 Location: Kokomo, IN	http://www.fblrotors.com/FBL-Swashpl...der_p_440.html Powered by Apple __________________ -Bill- Synergy E7 vBar \| Synergy E5-S (Rail 606) \| T-Rex 550E vBar \| T-Rex 450SE \| GAUI X2 FES \| GAUI 255 \| T-Rex 450SE \| Blade mCP X \|

06-11-2012, 06:24 AM	#6
povern Registered Users My HF Map location Join Date: Apr 2008 Location: Little Falls, MN	$43. What is different about it to make it better? I'm all for cool tools to help set up the heli, but I do not see anything special about this one except the price. __________________ Screw It, I'm gonna fly. Logo 6003d and 600se: BLS all around, Pyro and HeliJive

06-11-2012, 05:08 AM	#4
mu300pilot Registered Users Join Date: Dec 2008 Location: Okeechobee, FL USA	A Picture would be nice

06-11-2012, 08:53 AM	#7
Chris Sexton Registered Users My HF Map location Join Date: Feb 2011 Location: Columbus, Ohio	The "special" is that it has a built in phase tool for the floating wash out base. You simply put the jesus bolt for the head in, and push the washout base up into the tool. It will hold it square so you can tighten the clamp on the washout. This will get you perfect phasing every time. I used mine on Saturday, and it tracks perfectly in a loop. __________________ Team Synergy/Team Scorpion

06-11-2012, 09:09 AM	#8
drdispatch Registered Users My HF Map location Join Date: Jan 2010 Location: Springfield, MO	It's high quality, works on the N5c/E7/E7, and gets the phasing arms perfect. __________________ Synergy N5c YS56, CGY750 Gaui X5 Vbar MSH Protos Vbar Blade 130X

06-11-2012, 12:48 PM	#10
bart2546 Registered Users Join Date: Oct 2009 Location: Canal Winchester, OH	I ordered one last week and it should be here today. Can't wait. Even though my N5c flies just fine now, I'm going to go through and set it up again in the head with this nifty little tool. Regards, Brandon Bartolomucci Sent from my iPhone __________________ Regards, Brandon Bartolomucci Team Synergy; Scorpion; & Bavarian Demon Synergy N5c & E5

06-11-2012, 12:51 PM	#11
felborn Registered Users Join Date: Jul 2006 Location: Sandnes, Norway	Phasing arm? Thats nostalgic __________________ Nano CPX, 130x, Trex250, 450Pro, 550 & 600EFL Pro. SAB Goblin 500 & 700 - Lynx Team Pilot -

06-13-2012, 01:42 PM	#15
bart2546 Registered Users Join Date: Oct 2009 Location: Canal Winchester, OH	Got mine in. Amazing little tool one of the best 40 bucks I e spent tool wise in the hobby. Worked like a charm. I highly recommend this tool if you own a Synergy. Regards, Brandon Bartolomucci Sent from my iPhone __________________ Regards, Brandon Bartolomucci Team Synergy; Scorpion; & Bavarian Demon Synergy N5c & E5

06-13-2012, 08:15 PM	#16
4cyclic Registered Users Join Date: May 2004 Location: Extreme Northern Vermont	Got mine too, very nicely made and shiny !

06-21-2012, 01:48 PM	#17
cmezip Registered Users My HF Map location Join Date: Oct 2006 Location: St. Louis Missouri	I think I will have to get me one of these. Sent from my SPH-D710 using Tapatalk 2 __________________ Synergy E5 and E7

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode