Fuel mix

Hookah · 06-19-2012, 12:07 AM

I have been running 15% nitro in my OS50, but would like to try 30% what I would like to know is how may clicks richer do I need to adjust my needle out for the increase in nitro.

paulmedford · 06-19-2012, 07:08 PM

cant say for sure, but if i were you, i would go a full turn out and start leaning for power from there

Hookah · 06-19-2012, 07:44 PM

I am a little less than one and a half turns out at the moment a whole turn seems allot as a starting point

fastone93 · 06-20-2012, 07:01 AM

start at 2 turns out and work your way in from there

06-19-2012, 12:07 AM	#1
Hookah Registered Users Join Date: Dec 2009 Location: New Zealand	Fuel mix I have been running 15% nitro in my OS50, but would like to try 30% what I would like to know is how may clicks richer do I need to adjust my needle out for the increase in nitro.

06-20-2012, 07:01 AM	#4
fastone93 Registered Users My HF Map location Join Date: Nov 2009 Location: Hillsville, VA, USA	start at 2 turns out and work your way in from there __________________ Trex 700 dfc (OS 105HZ-R, Hatori Pipe, MKS HBL950, Futaba CGY750, MKS HBL980, Rail Mains, Rail Tail Blades)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-19-2012, 07:08 PM	#2
paulmedford Registered Users Join Date: Jan 2010 Location: trinidad and tobago	cant say for sure, but if i were you, i would go a full turn out and start leaning for power from there

06-19-2012, 07:44 PM	#3
Hookah Registered Users Thread Starter Join Date: Dec 2009 Location: New Zealand	I am a little less than one and a half turns out at the moment a whole turn seems allot as a starting point