HW 120HV and Hacker motor setup

[joliecoeur13]

So I got that setup on mine , HW 120HV / sk720 Gov. and stock Hacker motor

I wonder what Timing you guys think works the best ? 15 or 18

[belcom]

I believe Hacker recommends 15 but I ran mine at 18 and it had plenty of power while coming down just warm.

[jmancobra]

I'm running this exact setup with a 14t. Using a beastx at the moment and have no gov. my idle 1 (which i pretty much only use) is set at 86%. My setup is running hot and about 2.5-3 min of just "throwing it around" it hits some sort of overheat protection and loses significant power. enough to land but thats about it. I m ordering a 13t and going to run it around 90-95 percent. I hear the HW's like to be closer to 100%. Vbar should be here by the weekend too.

[joliecoeur13]

I have been using it on the 18 timing setting , works fine but the motor is pretty warm when she comes down for sure .... that's with 690's and 13T pinion /sk gov.