Throtle Hold

[kljw]

Hi
if this is the wrong section, or has been asked before, then my humble appologies to all.

i am trying to set throtle hold on my 600elf with a ICE2 80 and FUTABA 8J, but not getting anywhere.

can any one detail out the procedure please.

keith

[ziper_it]

If similar to T8FG:

- in the CONDITION page enable HOLD condition and assign a switch to it
- in THR HOLD page enable ACT

Should be that simple.

[kljw]

Zip_IT
will give that a go and see what happens,

many thanks
keith

[ziper_it]

I downloaded the manual and the menu are slightly different.
So for the T8J you should:

Go to the THR HOLD page:
- Press the + button for one second
- Change the MIX value from INH to OFF, then press the + button
- Set the RATE value, 0 should be fine for now (you probably don't need bailout), then press the + button
- Press the end button twice

Go to the CONDITION menu:
- ensure the THR-HOLD condition is there.
- change the assigned switch if you'd like (I've understood default is switch E or G depending on the radio model)

Done

Hope it works