Increasing pitch on 3GX 2.1

jfh666 · 07-04-2012, 12:02 AM

Hi sorry for the noob question but i upgraded to 2.1 a few days ago and i find im missing pitch and id like to increase it.

I know i have to use the 3GX for the roll and flip rate but the pitch was done thru swash mix. Can i just increase the pitch on my Rx or do i need to re-do the rest of the setup?

squibcakes · 07-04-2012, 01:32 AM

redo all DIR setup - you will find all the swash mixes will change.

spidermonkey · 07-04-2012, 04:31 AM

Do you meet travel limit? I haven't played with that yet but yeah I don't think they want us to use the Tx for any adjustments. They want to see us use the 3GX unit for everything to get some feed back on the 2.1. That doesn't answer your question thou sorry.

jfh666 · 07-04-2012, 06:35 AM

Thanks for the response. So i guess ill re-do my DIR setup. Thats the part i dont like about 2/2.1, it should either be all on the box, or all on the Tx, not half and half.

07-04-2012, 12:02 AM	#1
jfh666 Registered Users Join Date: Jul 2011 Location: Canada	Increasing pitch on 3GX 2.1 Hi sorry for the noob question but i upgraded to 2.1 a few days ago and i find im missing pitch and id like to increase it. I know i have to use the 3GX for the roll and flip rate but the pitch was done thru swash mix. Can i just increase the pitch on my Rx or do i need to re-do the rest of the setup?

07-04-2012, 01:32 AM	#2
squibcakes Registered Users My HF Map location Join Date: Feb 2008 Location: Brisbane, Australia	redo all DIR setup - you will find all the swash mixes will change. __________________ The flight isn't complete until the blades stop turning... [Trex 600N, V-Bar] [Trex 450ProV2, 3Gx]

07-04-2012, 04:31 AM	#3
spidermonkey Registered Users Join Date: Apr 2012 Location: Australia	Do you meet travel limit? I haven't played with that yet but yeah I don't think they want us to use the Tx for any adjustments. They want to see us use the 3GX unit for everything to get some feed back on the 2.1. That doesn't answer your question thou sorry. __________________ Trex 600EFL Pro DFC Vbar CC.HV80 Dx8 To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-04-2012, 06:35 AM	#4
jfh666 Registered Users Thread Starter Join Date: Jul 2011 Location: Canada	Thanks for the response. So i guess ill re-do my DIR setup. Thats the part i dont like about 2/2.1, it should either be all on the box, or all on the Tx, not half and half.