sk 540

[dl5973]

Can you add expo in my TX to help soften centre stick - aileron, elevator or tail with this flybarless unit?

I noticed that when I add 15% or more expo in my TX the elevator maximum input reciever values on the laptop decrease form 100% to around 96% when using maximum elevator stick inputs on my TX. The funny thing is aileron and rudder do not get affected by adding expo.


Can I use dual rates to slow down max flip and roll rates or tail yaw or do I mess with the contol rates on the laptop ?

[georgi UK]

=] tail expo is in the SK software, yes you can use Tx expo for aileron & elevator, same for dual rates, no idea on elev drop? what does the Tx live fields show?

[dl5973]

I was refering to live field.

when I add elevator expo in TX the live field value drops when i give max defletion on my tx for elevator. If I dont use expo 100 tx gives 100% on live field for elevator.

[georgi UK]

=] yes, I got that bit, I am referring to the Tx live data, ie, is this on the input side or SK side?...

[dl5973]

its on the sk side