The laboratory has been buzzin' again - Page 92

Just Another Flyer · 07-07-2012, 03:24 PM

How is the frame going. Also I just relized my normal sig shows up when I post from my ipod

runesb · 07-07-2012, 05:58 PM

The frame is going well

not too far from beeing tested

Just Another Flyer · 07-22-2012, 07:03 PM

Are the frames finished yet? Also with 700 frames how large do you think you could get a heli?

nightflyr · 07-22-2012, 11:01 PM

The prototype has arrived and is being assembled, time will tell how well it will perform.

nightflyr · 07-25-2012, 05:24 PM

http://www.helifreak.com/showthread....27#post4138627

Just Another Flyer · 07-25-2012, 07:17 PM

That's one nice build you have going there.

nightflyr · 07-25-2012, 08:24 PM

Thank you.. should be interesting to finish

Navigator53 · 07-27-2012, 08:26 AM

Looking good Rich

I see you have both EC5's and Andersen Power Poles

I just converted everything over to APP's 45 amp including a 4,000 watt 12 lb Quad

Had to size the wire down from the ESC's to git it all in, hope I don't have a Mel-Function

Mel

nightflyr · 07-27-2012, 08:53 AM

Those EC connectors are being replaced, that was a battery from one of my fixed wings.

Navigator53 · 07-27-2012, 12:17 PM

Quote:

Originally Posted by nightflyr

Those EC connectors are being replaced, that was a battery from one of my fixed wings.

Whew!!

nightflyr · 08-04-2012, 10:31 AM

YouTube

Just Another Flyer · 08-04-2012, 10:41 AM

Well your esc sure isn't going any where.

5307thBP · 08-04-2012, 09:49 PM

That looks awesome! I just love the skeletal structure compared to carbon fiber.

PS.. time to work on that scale heli-pad! j/k

nightflyr · 08-05-2012, 05:55 AM

Quote:

Originally Posted by 5307thBP

That looks awesome! I just love the skeletal structure compared to carbon fiber.

PS.. time to work on that scale heli-pad! j/k

Yea I know.... That will be another project

fusionsx00 · 08-06-2012, 09:49 AM

wow awesome cnc work

is that a 4015 scorpion?

nightflyr · 08-06-2012, 10:22 AM

kregan does nice work

The motor is a 5020-450

nightflyr · 08-06-2012, 06:08 PM

Well slowly but surely getting to the final results..

Final got some clothes on the old girl..

Remove the 2S LiPo and BEC for a Thin LiFePO pack directly to the AR7100 and ESC fan

Navigator53 · 08-06-2012, 09:07 PM

One clean machine with a lot of detail to wiring

I like the open frame design too, let the Dragon breathe

Just Another Flyer · 09-12-2012, 06:30 PM

So what's up?? I am making my mcpx brushless!

61Espo · 09-14-2012, 05:09 PM

Yeah Baby!!!

07-07-2012, 05:58 PM	#1822
runesb Registered Users Join Date: Feb 2011 Location: Norway	The frame is going well not too far from beeing tested __________________ 450, MiniVolt 500, 550, K700 K6-800 K1000E To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

07-22-2012, 11:01 PM	#1824
nightflyr Registered Users Thread Starter My HF Map location Join Date: Jan 2009 Location: Long Island, NY	The prototype has arrived and is being assembled, time will tell how well it will perform. __________________ MSR, MCPX, 450s, 600, 650, 700, 800, 900, 1000 Assorted Mix Fixed Wing. AMA # 972083 Last edited by nightflyr; 07-23-2012 at 06:30 PM..

07-25-2012, 05:24 PM	#1825
nightflyr Registered Users Thread Starter My HF Map location Join Date: Jan 2009 Location: Long Island, NY	KF-700 so far http://www.helifreak.com/showthread....27#post4138627 __________________ MSR, MCPX, 450s, 600, 650, 700, 800, 900, 1000 Assorted Mix Fixed Wing. AMA # 972083

07-25-2012, 08:24 PM	#1827
nightflyr Registered Users Thread Starter My HF Map location Join Date: Jan 2009 Location: Long Island, NY	Thank you.. should be interesting to finish __________________ MSR, MCPX, 450s, 600, 650, 700, 800, 900, 1000 Assorted Mix Fixed Wing. AMA # 972083

07-27-2012, 08:26 AM	#1828
Navigator53 Registered Users My HF Map location Join Date: Mar 2008 Location: Canby, Oregon	Looking good Rich I see you have both EC5's and Andersen Power Poles I just converted everything over to APP's 45 amp including a 4,000 watt 12 lb Quad Had to size the wire down from the ESC's to git it all in, hope I don't have a Mel-Function Mel __________________ When the people find that they can vote themselves money, that will herald the end of the republic. ~Benjamin Franklin ~ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

07-07-2012, 03:24 PM	#1821
Just Another Flyer Join Date: Jun 2012 Location: Midwest	How is the frame going. Also I just relized my normal sig shows up when I post from my ipod

07-22-2012, 07:03 PM	#1823
Just Another Flyer Join Date: Jun 2012 Location: Midwest	Are the frames finished yet? Also with 700 frames how large do you think you could get a heli?

07-25-2012, 07:17 PM	#1826
Just Another Flyer Join Date: Jun 2012 Location: Midwest	That's one nice build you have going there.

07-27-2012, 08:53 AM	#1829
nightflyr Registered Users Thread Starter My HF Map location Join Date: Jan 2009 Location: Long Island, NY	Those EC connectors are being replaced, that was a battery from one of my fixed wings. __________________ MSR, MCPX, 450s, 600, 650, 700, 800, 900, 1000 Assorted Mix Fixed Wing. AMA # 972083

08-04-2012, 10:41 AM	#1832
Just Another Flyer Join Date: Jun 2012 Location: Midwest	Well your esc sure isn't going any where.

08-04-2012, 09:49 PM	#1833
5307thBP Registered Users Join Date: Feb 2012 Location: Sobieski, WI, USA	That looks awesome! I just love the skeletal structure compared to carbon fiber. PS.. time to work on that scale heli-pad! j/k

08-06-2012, 09:49 AM	#1835
fusionsx00 Registered Users Join Date: Sep 2010 Location: usa	wow awesome cnc work is that a 4015 scorpion? __________________ Dx8 mCPX bl v1 hp05s130X GauiX2FESds11,ds95i beastx Gaui X5FES,AR7200BX,Xera4020Torq9088,9188

08-06-2012, 10:22 AM	#1836
nightflyr Registered Users Thread Starter My HF Map location Join Date: Jan 2009 Location: Long Island, NY	kregan does nice work The motor is a 5020-450 __________________ MSR, MCPX, 450s, 600, 650, 700, 800, 900, 1000 Assorted Mix Fixed Wing. AMA # 972083

08-06-2012, 06:08 PM	#1837
nightflyr Registered Users Thread Starter My HF Map location Join Date: Jan 2009 Location: Long Island, NY	Well slowly but surely getting to the final results.. Final got some clothes on the old girl.. Remove the 2S LiPo and BEC for a Thin LiFePO pack directly to the AR7100 and ESC fan Attached Thumbnails __________________ MSR, MCPX, 450s, 600, 650, 700, 800, 900, 1000 Assorted Mix Fixed Wing. AMA # 972083

08-06-2012, 09:07 PM	#1838
Navigator53 Registered Users My HF Map location Join Date: Mar 2008 Location: Canby, Oregon	One clean machine with a lot of detail to wiring I like the open frame design too, let the Dragon breathe __________________ When the people find that they can vote themselves money, that will herald the end of the republic. ~Benjamin Franklin ~ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Last edited by Navigator53; 08-08-2012 at 11:18 PM..

09-12-2012, 06:30 PM	#1839
Just Another Flyer Join Date: Jun 2012 Location: Midwest	So what's up?? I am making my mcpx brushless!

09-14-2012, 05:09 PM	#1840
61Espo Registered Users Join Date: Nov 2011 Location: Staten Island, New York	Yeah Baby!!! __________________ Steve (ESPO) I Refuse to Give Up! To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. HIROBO SST EAGLE 3 WC / X CELL-SE 99 / FUTABA 14SGH / DX8 *Seaview Rotary Wings, Brooklyn New York* AMA# 1000843

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode