mini vbar unit moves inside of case.

[lavaandy]

just bought a mini vbar used on here, the unit moves inside the case is this normal?

[Larry227]

Some of the older ones did that, mine included. Just take out the four screws and pop the back off and put a piece of double sided sticky tape inside it and close it back up.

[Ah Clem]

"Just take out the four screws and pop the back off and put a piece of double sided sticky tape inside it and close it back up."

Absolutely right!!

[lavaandy]

thanks guys any kind of tape your liking?

[Larry227]

Whatever you have handy will probably work. I used the white 3M tape.
First time I did it I didn't even use tape, I just used a small square of foam and it worked fine. I changed it to the 3M tape weeks later when others started recommending it.

[Raydee]

I used four small squares of 3m double sided foam tape, the one with the green and white backing. It is a little thicker than the tape with the red backing but I liked the little extra cushion it provided. It really made a huge difference in the way my T500 flies.

[Andy from Sandy]

Using Futaba plugs also stops the board from moving.