New HK i86 controller - Page 2

petedee · 07-08-2012, 03:38 AM

Been busy putting together my micro hexa today, I need to g back and do a complete re-setup but not finding the time to do it at the moment, maybe this week.

Follow the instructions and make sure you do the stick centering, this is very important.

boykintom · 07-08-2012, 05:17 AM

Yeah, I did that and the esc calibration. too. Took me a while to get it to arm and disarm properly, but I finally figured that out, too. Now, some tweaking on the roll and I'll be in business. I have the HK board with the lcd screen in transit, and I'll probably swap that one out when it arrives.

petedee · 07-08-2012, 02:24 PM

I also have one of the KK2 LCD boards on its way, maybe be here today, that is going in a DJI450 frame with 2822/14 1450kv motors and 12 amp ESC's.

pinguin · 07-13-2012, 10:09 AM

Pete, still waiting on the board review.

petedee · 07-13-2012, 04:32 PM

Hopefully I will get to this over the weekend, have been very busy.

I did have a quick look and plugged a battery into the board, it fired up and I went through the menus, very easy to set up. I have also redone the English manual to make it a better read and to print off as a booklet.

Available here.

boykintom · 07-13-2012, 10:10 PM

Thanks for the manual revision! Hope my board comes in tomorrow. Meanwhile, the i86 is flying very well.

pinguin · 07-14-2012, 01:06 AM

Quote:

Originally Posted by petedee

Hopefully I will get to this over the weekend, have been very busy.

I did have a quick look and plugged a battery into the board, it fired up and I went through the menus, very easy to set up. I have also redone the English manual to make it a better read and to print off as a booklet.

Available here.

Pete, I think we are talking about i86 board, not KK2. Am I missing it something here?

Anyway, thanks for the manual. Hopefully I will have my boards (i86 and KK2) next week.

petedee · 07-14-2012, 03:00 PM

LOL, yes we got crossed up, so many new boards and frames.

Have done the first bench test with the micro hexa and the KK2, probably get a chance to fly that later today, it is only just 6am here now so just having a coffee.

One of my flying mates is coming over later this afternoon, hopefully have it ready by then.

I have to build my spare 450 frame for the i86 to go into, I decided I was not progressing well with the micro frame and the i86, it was just not happy. If I get time I will go back over the setup guide and see if I have missed something but I just could not get rid of some bad oscillations so decided to put it away for a bit and then the KK2 arrived, I have already ordered a second one I like it so much.

Pete.

07-08-2012, 03:38 AM	#21
petedee Registered Users Thread Starter Join Date: Sep 2011 Location: Canberra, Australia	Been busy putting together my micro hexa today, I need to g back and do a complete re-setup but not finding the time to do it at the moment, maybe this week. Follow the instructions and make sure you do the stick centering, this is very important. __________________ DJI Naza 330, 450 & 550 hexa, TBS Discovery (Naza-M/5.8Ghz vid link/ET telemetry), KK2 micro hexa and micro quad, Nano Ladybird/Spektrum Hybrid, Nano MQX hybrid. 300X, Trex 450 Pro DFC, mCP X's, mSR X, nano CP X DX18, 14SG To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

07-08-2012, 02:24 PM	#23
petedee Registered Users Thread Starter Join Date: Sep 2011 Location: Canberra, Australia	I also have one of the KK2 LCD boards on its way, maybe be here today, that is going in a DJI450 frame with 2822/14 1450kv motors and 12 amp ESC's. __________________ DJI Naza 330, 450 & 550 hexa, TBS Discovery (Naza-M/5.8Ghz vid link/ET telemetry), KK2 micro hexa and micro quad, Nano Ladybird/Spektrum Hybrid, Nano MQX hybrid. 300X, Trex 450 Pro DFC, mCP X's, mSR X, nano CP X DX18, 14SG To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

07-14-2012, 03:00 PM	#28
petedee Registered Users Thread Starter Join Date: Sep 2011 Location: Canberra, Australia	LOL, yes we got crossed up, so many new boards and frames. Have done the first bench test with the micro hexa and the KK2, probably get a chance to fly that later today, it is only just 6am here now so just having a coffee. One of my flying mates is coming over later this afternoon, hopefully have it ready by then. I have to build my spare 450 frame for the i86 to go into, I decided I was not progressing well with the micro frame and the i86, it was just not happy. If I get time I will go back over the setup guide and see if I have missed something but I just could not get rid of some bad oscillations so decided to put it away for a bit and then the KK2 arrived, I have already ordered a second one I like it so much. Pete. __________________ DJI Naza 330, 450 & 550 hexa, TBS Discovery (Naza-M/5.8Ghz vid link/ET telemetry), KK2 micro hexa and micro quad, Nano Ladybird/Spektrum Hybrid, Nano MQX hybrid. 300X, Trex 450 Pro DFC, mCP X's, mSR X, nano CP X DX18, 14SG To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-08-2012, 05:17 AM	#22
boykintom Registered Users Join Date: Nov 2011 Location: Ridge Spring, South Carolina	Yeah, I did that and the esc calibration. too. Took me a while to get it to arm and disarm properly, but I finally figured that out, too. Now, some tweaking on the roll and I'll be in business. I have the HK board with the lcd screen in transit, and I'll probably swap that one out when it arrives.

07-13-2012, 10:09 AM	#24
pinguin Registered Users Join Date: Apr 2009 Location: Indonesia	Pete, still waiting on the board review.

07-13-2012, 10:10 PM	#26
boykintom Registered Users Join Date: Nov 2011 Location: Ridge Spring, South Carolina	Thanks for the manual revision! Hope my board comes in tomorrow. Meanwhile, the i86 is flying very well.