Register Now

crickr1 · 07-15-2012, 08:49 AM

All i can say is WOW!!!

Just had maiden and it was flawless! Was very nervous when it spooled up, first heli this big, but wow, popped into nice stable hover, total control, felt great! Very mild 4 min of flight ,to test out and check batt usage. Everything went like clockwork. I have it tamed down for now, maiden and few packs to get use to it.
d/r70 and expo25 w/th at 75%. set beast with 13.5 +-. Like driving a 5series BMW.
Well time to play,

Rodney Kirstine · 07-15-2012, 09:35 AM

Congrats!

wbefield · 07-15-2012, 09:39 AM

Very nice to hear sir! Can't wait to get mine in the air. Doesn't look like I'm going to be able to maiden mine today as planned.

mrultralite · 07-15-2012, 11:05 AM

How do you do that? without tail wag ? Using the 7200bx? Tell me your "D' parameter settings. Also are you using normal '' or '' sport' or just expo via the Tx as you say?

crickr1 · 07-15-2012, 01:16 PM

Im using "user defined parameters" no light on.then you can set your own expo Dr settings. Gyros gaunt at 30( also not using 7200bx i have futaba rx tx.. The only prob i had was on first spool up before got off ground. Noticed it trying to spin a little. Went over tail and realized i didn't have 7* on tail. Had it at 0*. adjusted tail linkage couple turns and. .Wella. Successful maiden. Got lucky didn't even change gain on gyros yet. Haven't pushed it yet though. Im sure a couple bumps up before all is said and done

07-15-2012, 08:49 AM	#1 (permalink)
crickr1 Registered Users Join Date: May 2011 Location: New Jersey	Wholly Guacamole Batman! All i can say is WOW!!! Just had maiden and it was flawless! Was very nervous when it spooled up, first heli this big, but wow, popped into nice stable hover, total control, felt great! Very mild 4 min of flight ,to test out and check batt usage. Everything went like clockwork. I have it tamed down for now, maiden and few packs to get use to it. d/r70 and expo25 w/th at 75%. set beast with 13.5 +-. Like driving a 5series BMW. Well time to play, __________________ Rick, Team pilot , EGODRIFT, KST, Helidirect, Lynx/Oxy

07-15-2012, 09:35 AM	#2 (permalink)
Rodney Kirstine Registered Users Join Date: Mar 2012	Congrats! __________________ Team Synergy Field Rep, Rail Blades

07-15-2012, 09:39 AM	#3 (permalink)
wbefield Registered Users My HF Map location Join Date: Jun 2011	Very nice to hear sir! Can't wait to get mine in the air. Doesn't look like I'm going to be able to maiden mine today as planned. __________________ William Synergy N5C, 130x, Mini Protos 6s

07-15-2012, 01:16 PM	#5 (permalink)
crickr1 Registered Users Thread Starter Join Date: May 2011 Location: New Jersey	Im using "user defined parameters" no light on.then you can set your own expo Dr settings. Gyros gaunt at 30( also not using 7200bx i have futaba rx tx.. The only prob i had was on first spool up before got off ground. Noticed it trying to spin a little. Went over tail and realized i didn't have 7* on tail. Had it at 0*. adjusted tail linkage couple turns and. .Wella. Successful maiden. Got lucky didn't even change gain on gyros yet. Haven't pushed it yet though. Im sure a couple bumps up before all is said and done __________________ Rick, Team pilot , EGODRIFT, KST, Helidirect, Lynx/Oxy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-15-2012, 11:05 AM	#4 (permalink)
mrultralite Registered Users Join Date: Jun 2011	How do you do that? without tail wag ? Using the 7200bx? Tell me your "D' parameter settings. Also are you using normal '' or '' sport' or just expo via the Tx as you say?

Register Now

Log-in