Futaba 9550's on 6.6 life 123

chrisansilver · 07-22-2012, 07:35 PM

Just as the title says, can you run the Futaba 9550's on straight life 6.6 without issues.

Also how about a DS650 on the same?

Thanks..

rceccleston · 07-23-2012, 01:25 AM

Depends on the voltage hold due to the c rating of the pack?

A HobbyKing 30-40c held at 6.6v under load so I used an Align 0.7v step down on the tail, while a Hyperion 5c drops to 6v so no step down required.

07-22-2012, 07:35 PM	#1
chrisansilver Registered Users Join Date: Nov 2011 Location: Texas	Futaba 9550's on 6.6 life 123 Just as the title says, can you run the Futaba 9550's on straight life 6.6 without issues. Also how about a DS650 on the same? Thanks..

07-23-2012, 01:25 AM	#2
rceccleston Registered Users Join Date: Apr 2008 Location: Shropshire, UK	Depends on the voltage hold due to the c rating of the pack? A HobbyKing 30-40c held at 6.6v under load so I used an Align 0.7v step down on the tail, while a Hyperion 5c drops to 6v so no step down required. __________________ T-Rex 700e 'Chrome Edition', Skookum 720, Turnigy , Scorpion motors, Align servos. DX8 with Turnigy 4000Mah Li-Po

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode