Swash setup 600 FBL Pro with BeastX

[PieroCapredoni]

Hi all, Im starting build of the 600 pro with BeastX and want to know, how do you setup the servo arms, swashplate, etc, to achieve the best results.... Thank you all!!!

[Reever45]

http://helifreak.com/showpost.php?p=...7&postcount=11

[PieroCapredoni]

thanks for the link, but I will use stock parts, this thread uses KDE parts. Do you know if this numbers applies to stock parts too?

[Mike A.]

I have mine setup the "standard" way I guess..Servo arms are horizontal at 0* pitch, using the outer holes on the arms. Links are adjusted for 0* pitch. When doing the BeastX setup on step J the light isn't blue at 6* but it flies great.

[destroyerbmx]

I got a package of 700 ball links for the innner swash where the FBL link attaches. I used the shorter one, shorter than stock, to get the Blue light at 6 Degrees and it has flown perfect ever since. Its a quick inexpensive mod that will take the place of the KDE Arms. You can use both of them for an even better higher resolution setup, but the inner swash ball swap alone is enough. Other than that I am completely stock.

[lmpf14991]

http://helifreak.com/showthread.php?t=268460

[Praztek]

I am in the process of completing the align 600 efl pro build, along with the spektrum ar7200bx.

Parts needed

1. ALIGN 700EFL Linkage rod(A) set H70066 - TREX 700E FLYBARLESS---will use the ball links only

2. Is this the correct part # for the 700 balls - Align Linkage Ball Set HN7065 - Trex700E/ Nitro Pro. ?

3. Utilize the 700 balls for the swash, where the links up to the head connect.

4. Will be using the inside holes for all servo horns


Thanks Again

Originally Posted by destroyerbmx

I got a package of 700 ball links for the innner swash where the FBL link attaches. I used the shorter one, shorter than stock, to get the Blue light at 6 Degrees and it has flown perfect ever since. Its a quick inexpensive mod that will take the place of the KDE Arms. You can use both of them for an even better higher resolution setup, but the inner swash ball swap alone is enough. Other than that I am completely stock.

[Praztek]

Got a follow up from another member.

Part number for inside swash should be.

Align Linkage Ball Set HN7065 - Trex700E/ Nitro Pro.
The length of the ball is 8.5mm.