500EFL Pro + AR7200BX routing/wiring pics? - Page 2

blackout19 · 08-09-2012, 02:40 AM

It's nothing to do with the signal getting through the canopy or not. When the heli is nose in to you, facing slightly to the right, you would end up with both leads from the 7200BX and one from the sat being shielded by the carbon frame. Just from a safety point of view, even if you only lose the signal for a second, the time it takes for the AR7200BX to re initialise would see your heli in bits on the floor, or worse if it was heading towards people at the time.

Steemo · 08-09-2012, 05:19 AM

Quote:

Originally Posted by blackout19

...even if you only lose the signal for a second, the time it takes for the AR7200BX to re initialise would see your heli in bits on the floor, or worse if it was heading towards people at the time.

+1000000

Steemo · 08-10-2012, 03:57 AM

Thought I'd post pics my latest wiring and electronics arrangement.
ESC on the bottom of the frame isn't ideal in a crash but if it got killed I'd have an excuse to get a CC 75A.
I used to conceal all the wires in the frame but have opted for a tidy arrangement that allows the boom block to be easily removed.

lazsyss350 · 08-13-2012, 08:29 PM

I've got some pics here, take a look http://helifreak.com/showthread.php?t=443900

muscleflex · 10-06-2012, 02:06 AM

Wires everywhere!

Quote:

Originally Posted by Steemo

Thought I'd post pics my latest wiring and electronics arrangement.
ESC on the bottom of the frame isn't ideal in a crash but if it got killed I'd have an excuse to get a CC 75A.
I used to conceal all the wires in the frame but have opted for a tidy arrangement that allows the boom block to be easily removed.

08-09-2012, 02:40 AM	#21
blackout19 Registered Users Join Date: Jan 2012 Location: United Kingdom	It's nothing to do with the signal getting through the canopy or not. When the heli is nose in to you, facing slightly to the right, you would end up with both leads from the 7200BX and one from the sat being shielded by the carbon frame. Just from a safety point of view, even if you only lose the signal for a second, the time it takes for the AR7200BX to re initialise would see your heli in bits on the floor, or worse if it was heading towards people at the time. __________________ TREX 700e DFC HV-Ikon FBL \| TREX 500 EFL Pro-AR7200BX \| TREX 450 Pro V2/Tarot V2 DFC-Align 3GX 3.0

08-10-2012, 03:57 AM	#23
Steemo Registered Users My HF Map location Join Date: Jul 2011 Location: Gold Coast, Australia	Thought I'd post pics my latest wiring and electronics arrangement. ESC on the bottom of the frame isn't ideal in a crash but if it got killed I'd have an excuse to get a CC 75A. I used to conceal all the wires in the frame but have opted for a tidy arrangement that allows the boom block to be easily removed. Attached Thumbnails __________________ T-Rex 700E DFC HV Brain \| T-Rex 600E Pro DFC V-Bar Silverline 5.3 Pro \| T-Rex 500 DFC Pro AR7200BX JR DSX9 LE Mode 2

08-13-2012, 08:29 PM	#24
lazsyss350 Registered Users Join Date: Mar 2009 Location: Arlington hts, IL	I've got some pics here, take a look http://helifreak.com/showthread.php?t=443900 __________________ Trex 700e v2 fbl, 2x Synergy E5-s6, Trex 500pro fbl, Fusion 50 FBL , Mcpx, Ncpx, JR x9303

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode