blade cx2 with different transmiter?

Kostuhoss · 01-29-2012, 04:27 PM

Hi, i have bought a blade cx2 without transmiter, hoping that it would be possible to use eSky's belt cp 2.4ghz radio and receiwer to controll it. but for some reason i cant get motors to work. Have any of you guys found andy guide how to use non computerised radio on blade cx2? thaks for your help

whirlydude · 01-31-2012, 10:28 PM

What kind of receiver is it? Esky has a 2.4GHz 4 in 1 unit, which should work with that transmitter, but find out for sure before going ahead. Just remember to lower the throttle lever and the throttle trim to it's lowest setting when powering up the helicopter.

LeeT · 02-22-2012, 03:53 PM

You need to use a Spektrum transmitter. I use a DX 7 on mine

kevinbattista · 08-15-2012, 12:17 AM

Check this out .. http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXBPKF&P=ML

Ferret Dad · 08-15-2012, 11:24 AM

I have a CX3 bound to a DX5 and it flies great with it. The three center switches are reversed tho, I forget which one name wise. I also have Extreme blades with blade grips and a Super Skids 200 skid on it. With these it flies far better than it did stock.

Mike

01-29-2012, 04:27 PM	#1
Kostuhoss Registered Users Join Date: Jan 2012 Location: North London	blade cx2 with different transmiter? Hi, i have bought a blade cx2 without transmiter, hoping that it would be possible to use eSky's belt cp 2.4ghz radio and receiwer to controll it. but for some reason i cant get motors to work. Have any of you guys found andy guide how to use non computerised radio on blade cx2? thaks for your help

08-15-2012, 12:17 AM	#4
kevinbattista Registered Users My HF Map location Join Date: Mar 2010 Location: Dudley, MA. U.S.A.	Check this out .. http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXBPKF&P=ML __________________ it's not a competition, it's a hobby EXI 450 + FUTABA t7c Tx = To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Phoenix Sim "it's free to crash on a sim"

08-15-2012, 11:24 AM	#5
Ferret Dad Registered Users Join Date: Apr 2010 Location: Lusby, Maryland	I have a CX3 bound to a DX5 and it flies great with it. The three center switches are reversed tho, I forget which one name wise. I also have Extreme blades with blade grips and a Super Skids 200 skid on it. With these it flies far better than it did stock. Mike __________________ Blade mCX S300, mCX2, Tandem Rescue, Blade CP+ w/Huey body, Blade CX3, Heli-Max CX Micro S300, Heli Max CX Nano, Syma S107, Nine Eagles Bravo SX, Nine Eagles Draco Coax, Nine Eagles Bravo III Coax, E-Sky Nano w/Jet Ranger body

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-31-2012, 10:28 PM	#2
whirlydude Registered Users Join Date: Dec 2007 Location: USA	What kind of receiver is it? Esky has a 2.4GHz 4 in 1 unit, which should work with that transmitter, but find out for sure before going ahead. Just remember to lower the throttle lever and the throttle trim to it's lowest setting when powering up the helicopter.

02-22-2012, 03:53 PM	#3
LeeT Registered Users Join Date: Dec 2009 Location: Tampa Bay	You need to use a Spektrum transmitter. I use a DX 7 on mine