Register Now

ZIMMY1958 · 02-16-2013, 05:29 PM

I did a bad thing

I had the usb hooked up to the led v-sen before the battery, now the naza unit will not power up. does anybody know if it is the v-sen or the naza unit that fried. hope it was just the v-sen it is a lot cheaper to replace. any input will be helpfull thanks
Jim

02deuce · 02-16-2013, 09:18 PM

Quote:

Originally Posted by ZIMMY1958

I did a bad thing

I had the usb hooked up to the led v-sen before the battery, now the naza unit will not power up. does anybody know if it is the v-sen or the naza unit that fried. hope it was just the v-sen it is a lot cheaper to replace. any input will be helpfull thanks
Jim

I don't know why anything would have fried, I've had my USB plugged into my VU many times with out the power turned on. Something else must not be right, or I'm not understanding the problem.

jperkosk · 02-16-2013, 09:21 PM

Same here, connecting PC to VU via USB before powering up Naza will not damage it, why should it? This is actually my normal connection sequence...

ZIMMY1958 · 02-16-2013, 10:21 PM

well I was on my 5 or 6 adjustment for my gimbal gains for the day and had the usb plugged into the VU and computer then plugged the battery in and herd a sss sound

and now nothing will power up

sounded like something fried. manual says to power naza first then plug in usb then turn on software. this is how I had always done it in the past. maybe it was a bad VU guess I will tare it all apart and check everything tomorrow also ordered a new VU. just though some one may have had a problem like this thanks for your response

Subaru4WD · 02-17-2013, 10:30 AM

Might want to give DJI a call. Don't they provide tech support for their products?

ZIMMY1958 · 02-17-2013, 12:06 PM

found the problem, my plug for the lights was shorting or causing a disconnect it is 2 XT60 plugs with a JST hooked to it for a in line tap for anything that you want to run off main battery I got from HK.

02deuce · 02-17-2013, 12:43 PM

Quote:

Originally Posted by Subaru4wd

Might want to give DJI a call. Don't they provide tech support for their products?

Is their tech support for your KK boards or multi wi or any other boards for that matter?

02-16-2013, 05:29 PM	#1 (permalink)
ZIMMY1958 Registered Users My HF Map location Join Date: Nov 2011	dji naza led v-sen problem I did a bad thing I had the usb hooked up to the led v-sen before the battery, now the naza unit will not power up. does anybody know if it is the v-sen or the naza unit that fried. hope it was just the v-sen it is a lot cheaper to replace. any input will be helpfull thanks Jim __________________ Just have fun

02-16-2013, 09:21 PM	#3 (permalink)
jperkosk Registered Users My HF Map location Join Date: Dec 2009	Same here, connecting PC to VU via USB before powering up Naza will not damage it, why should it? This is actually my normal connection sequence... __________________ Jerry Trex 700N Pro fbl, 600N Pro x 2, 450SE v1, 250 v2 fbl, Compass 6HV fbl, Blade 450x, 400, 300x, 130x, mCPx, 120SR, mQx, mSR, Rotor Concepts HPQ1, Walkera CB180Q, CB100, Novus FP, CP, Esky Hunter, Big Lama.

02-16-2013, 10:21 PM	#4 (permalink)
ZIMMY1958 Registered Users Thread Starter My HF Map location Join Date: Nov 2011	well I was on my 5 or 6 adjustment for my gimbal gains for the day and had the usb plugged into the VU and computer then plugged the battery in and herd a sss sound and now nothing will power up sounded like something fried. manual says to power naza first then plug in usb then turn on software. this is how I had always done it in the past. maybe it was a bad VU guess I will tare it all apart and check everything tomorrow also ordered a new VU. just though some one may have had a problem like this thanks for your response __________________ Just have fun

02-17-2013, 12:06 PM	#6 (permalink)
ZIMMY1958 Registered Users Thread Starter My HF Map location Join Date: Nov 2011	problen found found the problem, my plug for the lights was shorting or causing a disconnect it is 2 XT60 plugs with a JST hooked to it for a in line tap for anything that you want to run off main battery I got from HK. __________________ Just have fun Last edited by ZIMMY1958; 02-17-2013 at 12:47 PM.. Reason: sp

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-17-2013, 10:30 AM	#5 (permalink)
Subaru4WD Registered Users Join Date: Aug 2012	Might want to give DJI a call. Don't they provide tech support for their products?

Register Now

Log-in