SOLD - Gaui X3 with Xnova XTS 2618-1860 (6S), CC Edge Lite 50

[billsatori]

SOLD. Crashed many times and repaired many times! Great model, cheap to repair. Only criticism is the high part count but fortunately for you, I am including a lot of spares. Good for the person who does not mind tinkering and want to put together a great model on the cheap..

Air frame is in very good condition. Belt conversion with plastic tail grips and tail box. Only issue is stripped screws that conenct motor mount with frame.

Canopy is functional OK, beat up a little with many minor cracks and scrapes.

Xnova XTS 2618-1860 - very sweet motor.
Castle Creations Edge Lite 50. Label came off but in very good condition.
Lynx 11t Steel pinion (with two 12T and two 13T spares)
Three Turnigy nano-tech 1300 Mah 6S 35c batteries with battery brackets
Align 360 Carbon Blue blades (with one set of spares)

Spares inlcude:
CNC tail box
CNC tail grips
Torque tube parts
Gaui X3 Swash Level
Main Shaft
Spindle
Main Gear
Swashplate (plastic)
Lynx dampeners
Manual
Tons of Gaui X3 screws, washers, bearigs, clips, etc with organizer tray.

Needs:
3 cyclic servos
1 tail servo
flybarless system
receiver