New to vbar output solved

[goof2]

First vbar. Spectrum dx9 with 2dsmx 11ms setup.

I got vbar connected to pc and transmitter binding successful. When you move sticks the pc shows its working but can't get any servo to move. Have tried several different servos and different channels.

Not sure what I'm missing

Brendan

[Vinger]

Have to complete a setup at least, read the help on the left of the PC program on when to actually plug in servos as you move through the steps.

https://www.vstabi.info/en/node/1887

[dwoof]

Change servo options to 22ms and see what happens. Make sure you select digital only if using digital servos.

[goof2]

Now it’s working. Reset and started new setup.

But I’m confused do I change servo direction in transmitter or just vbar. It’s says to change in transmitter then says not to but also says to make sure everything matches.

Thanks
Brendan

[halfcab]

Originally Posted by goof2

Now it’s working. Reset and started new setup.

But I’m confused do I change servo direction in transmitter or just vbar. It’s says to change in transmitter then says not to but also says to make sure everything matches.

Thanks
Brendan

Try changing on Vbar first. 99% of the time it fine from there.

[goof2]

I got it all working I think. Just be unfamiliar with it.

Thanks