Mode 4 and Mode 6

[Phil777]

Using heli jive 120 v11 with a pyro 700-52

Last time i tried mode 6 mr mels headspeed calculator didn't seem correct,
Mode 4 was perfect.
Been using mode 4 ever since,
Mode 6 felt like instead of 1800 i had 1400 or lower.

I want to try mode 6 again for F3C. Id like to be able to use the governor bellow 50% for hovering.

Has anyone else had this problem with mode 6 not matching the calculator?
If not maybe i entered the wrong values

[swalko]

Calculator values for Helijive mode 6 are completely off.

[MrMel]

There is an separate Option for mode 6 in my calc, dont use same as mode 4

[Phil777]

Originally Posted by MrMel

There is an separate Option for mode 6 in my calc, dont use same as mode 4

I did use this, but it just doesn't seem to match my headspeed, i don't have a tach anymore to confirm this though, but noticeable by ear and performance.

Although i might have accidentally not clicked atv adjusted
and gone of the wrong headspeed value.

Will try again this weekend

[Groucho_]

I had the same problem with the calculator and mode six. The values were completely different.

[swalko]

Originally Posted by Groucho_

I had the same problem with the calculator and mode six. The values were completely different.

Same here, but i dont care, because i always set desired rpms in flight. I noticed one thing on mode6 ... my maximum rpms was lower than maximum rpms with mode4.

[MrMel]

Then they have changed something, have to look at that when I get a chance.

[MrMel]

Found the item that made the difference, if AR bailout is enabled or not, it's shifted about 10-12%.
It's more correct if you do not enable AR.

I will add another checkbox for the next online version.

[Phil777]

Thanks, looking forward to the update