Register Now

mario1173 · 04-20-2011, 05:58 PM

Hey guys I have a Trex 600N with a Spartan Quark. It is a great setup and I love the feel of the heli. The cyclic is crisp and fast and the tail is absolutely locked in. I have JR HV 8917 on the cyclic and an 8900 on the TR. My question is in regard to the rotation rate at full stick deflection. It is perfectly steady however I would like it to be a bit faster. I have searched the manual and have found nothing referring to this. Any Ideas would be appreciated.

Anthony440 · 04-20-2011, 07:07 PM

Do you have your tail slider set to it's limits ?

Finless · 04-20-2011, 07:13 PM

If everything is setup right, the speed at which the heli piro's is called piro rate. This is adjusted by increasing (faster) or decrease (slower) your rudder channel travel adjust (Futaba is end points). Not the gain channel but the actual rudder channel.

Yours by default is probably 100/100. Try 120/120. The quark is pretty good and getting the piro rate to match left and right evenly so usually you do not have to have different numbers for left and right. But if one way is faster/slower than the other then adjust that side only. e.g. you might wind up with 120/115 or something.

Bob

TowPilot · 04-22-2011, 04:49 AM

Hi,

Moved Thread
From:.....Main Forum - Helicopter Talk
To:.........Spartan RC - Quark, DS760 Gyros and all other Spartan RC Electronics

Left 1 week redirect from the Main Forum - Helicopter Talk

Regards,
Mike

04-20-2011, 05:58 PM	#1 (permalink)
mario1173 Registered Users Join Date: Apr 2011	Quark Hey guys I have a Trex 600N with a Spartan Quark. It is a great setup and I love the feel of the heli. The cyclic is crisp and fast and the tail is absolutely locked in. I have JR HV 8917 on the cyclic and an 8900 on the TR. My question is in regard to the rotation rate at full stick deflection. It is perfectly steady however I would like it to be a bit faster. I have searched the manual and have found nothing referring to this. Any Ideas would be appreciated.

04-20-2011, 07:13 PM	#3 (permalink)
Finless Team Taco VP My HF Map location Join Date: Nov 2005	If everything is setup right, the speed at which the heli piro's is called piro rate. This is adjusted by increasing (faster) or decrease (slower) your rudder channel travel adjust (Futaba is end points). Not the gain channel but the actual rudder channel. Yours by default is probably 100/100. Try 120/120. The quark is pretty good and getting the piro rate to match left and right evenly so usually you do not have to have different numbers for left and right. But if one way is faster/slower than the other then adjust that side only. e.g. you might wind up with 120/115 or something. Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-20-2011, 07:07 PM	#2 (permalink)
Anthony440 Registered Users My HF Map location Join Date: Jul 2009 Location: Colorado	Do you have your tail slider set to it's limits ?

04-22-2011, 04:49 AM	#4 (permalink)
TowPilot Join Date: Jun 2008	Hi, Moved Thread From:.....Main Forum - Helicopter Talk To:.........Spartan RC - Quark, DS760 Gyros and all other Spartan RC Electronics Left 1 week redirect from the Main Forum - Helicopter Talk Regards, Mike

Register Now

Log-in