Register Now

Mercuriell · 12-24-2008, 05:57 AM

Well maidened her today and very nice she is too - very stable but ready to fly off at a moments notice - thanks to Gavin for piloting

while I took the photos

Mercuriell · 12-26-2008, 04:39 AM

Setup:

ALign 91HP motor with ALign 91 pipe
BLS 451 on cyclic
BLS 251 on tail
AR7100R running 7.4V to cyclic
Spartan DS760
Radix 690 & ALign 105
AUW RTF (wet) 4.6kg

Aussie_G · 12-26-2008, 07:40 AM

Seems to fly pretty well, what is your setup?

On another note, Man I miss the Sunshine Coast, I lived in Beenliegh before moving here to South Carolina...

regiepogi · 12-28-2008, 06:34 PM

Santa must've been getting older. He didn't give me an Odin.

NolanManley · 12-28-2008, 11:41 PM

Built but not flown yet.

Odin Kit
YS91SR
Hatori SB-19 Pipe
Hitech 6975 on Cyclic
GY611 w/9256
Futaba S9253 Throttle
Multi Gov Pro
Perfect Regulator 6V
Outrage 2S 3600 Lipo
Radix 710
K&B TR blades
Total weight no fuel 9 lbs 4.2 oz.

Pics later. Build thread here; http://www.runryder.com/helicopter/t481143p1/

wufei · 01-11-2009, 09:09 AM

hi guys, I just want to share the video of my flight with my friends here in the Philippines last year. I flew for a year and half and still so much things to learn. My heli is a old version k3d with os 50 engine, GY401 and 9254 on gyro and nothing more.

Wufei's K3D Kamikaze Field (7 min 26 sec)

Thanks and please enjoy my video.

Mercuriell · 01-11-2009, 03:29 PM

No hardcore 3D here - just a nice sunny Sunday afternoon lazing around the sky with the Odin

- for those of you suffering winter you might want to check out what a blue sky looks like !!

Compass Odin - sport - light 3D flight 23MB wmv

Tradhunt · 01-15-2009, 11:08 AM

Got my Odin in yesterday. Almost done with the basic build. I'm still waiting on my electronics and engine. I'll post some pic's tonight.

I plan on running...

Ys or Align 91 I haven't made up my mind yet.. With the RJX 90 pipe

Ino-Labs 751mg servos

Solid-G/9256

Perfect regulator CCPM version

Atg since I have never tried one I've always ran multigov's

Rotortech 710 main's and Rotortech tails...

Mercuriell · 01-18-2009, 04:15 AM

Maidened my Knight 3D today (thanks Ben for the build

) - gee that's a pretty little heli with the SAB Red Devils on - didn't realise there was so much nice blue bling on the head. Anyway was a new motor (OS50 Hyper) so we ran her rich but wow - she flips on a pin and roll was pretty impressive too - really looking forward to flying this heli (if I can get it back off Ben

)

OS 50Hyper SX - SAb Red Devil 600 - ALign 95 tail - GY611 & 9256 - Align 620 on 8V from AR7100R

Auto180 · 01-18-2009, 04:17 AM

Quote:

Originally Posted by Mercuriell

Maidened my Knight 3D today (thanks Ben for the build

) - gee that's a pretty little heli with the SAB Red Devils on - didn't realise there was so much nice blue bling on the head. Anyway was a new motor (OS50 Hyper) so we ran her rich but wow - she flips on a pin and roll was pretty impressive too - really looking forward to flying this heli (if I can get it back off Ben

)

OS 50Hper SX - SAb Red Devil 600 - ALign 95 tail - GY611 & 9256 - Align 620 on 8V from AR7100R

Its great looking

KandB · 01-20-2009, 05:20 PM

Petr Novotny fliegt den Atom500 von Compassmodel (3 min 21 sec)

Atom video
Looks cool in the snow!!!

Kevin

alain_soresca · 02-01-2009, 05:51 AM

Hi Mercuriell, may i request a picture of the Odin and Knight3D side by side for us to have an idea on the size diff.? thanks

Mercuriell · 02-01-2009, 06:36 AM

This is the best pic I've got at the moment - not sure of the owner so hope they don't mind me posting

- My Knight borrowed by my buddy so I 'll post my own version in a few days !!

regiepogi · 02-02-2009, 08:47 PM

If my memory serves me right, I think the owner is Kimber1911. A fellow Filipino who's now in Seattle.

Alain, I'll make another build log. This time the Odin.

Of course you can fly it as well once it's built.

Mercuriell · 02-07-2009, 12:06 AM

Here's the two girls out sunning themselves before a bit of aerial abuse ! As you can see similar size - just a longer boom on the Knight - goes with the concept of a 90 engine in a 50 frame

alain_soresca · 02-07-2009, 12:48 AM

Mercuriell - thanks for the pictures.

regiepogi - wow another heli? that would be great.. thanks for the offer sir. see you soon.

krunder · 02-19-2009, 02:27 PM

Here are some pictures of my setup, and a video:

http://www.thepitchbrothers.com/inde...166-odin-setup

Best regards Krunder

Tradhunt · 02-22-2009, 09:26 PM

Well here's mine. Finally... I made a couple change's to it then what I listed in an earlyer post. I haven't gotten the chance to fly it yet (weather) still need to break-in the engine...

My setup:
OS 91Hz
Outrage 90 pipe
Solid-G/9256
Align 610 servo's
Fromeco reg.
Outrage 2s 3600
Rotortech 710 main's
Rotortech 105 on the tail
Multigov/Hs-85 throttle

Ignore the bad wiring job. Been test fitting and I might change the setup a bit with some 8717's and a AR7100R for an 8v setup. That will take up less space and I'll just plug the fan into the 8v throtle port.

regiepogi · 02-23-2009, 06:15 AM

Nice setup Tradhunt. I would love to know the things you did and materials as well to relocate the rudder servo in front.

Mercuriell · 02-23-2009, 06:42 AM

Quote:

Originally Posted by regiepogi

Nice setup Tradhunt. I would love to know the things you did and materials as well to relocate the rudder servo in front.

Looks like T700 pushrod and crank - nice job !

12-24-2008, 05:57 AM	#1 (permalink)
Mercuriell HF Support Join Date: Sep 2006	Post your Odin, Knight, 3Dplus pics & videos here !! Well maidened her today and very nice she is too - very stable but ready to fly off at a moments notice - thanks to Gavin for piloting while I took the photos Attached Thumbnails __________________ John Last edited by Mercuriell; 02-25-2010 at 07:07 AM..

12-26-2008, 04:39 AM	#2 (permalink)
Mercuriell HF Support Thread Starter Join Date: Sep 2006	Setup: ALign 91HP motor with ALign 91 pipe BLS 451 on cyclic BLS 251 on tail AR7100R running 7.4V to cyclic Spartan DS760 Radix 690 & ALign 105 AUW RTF (wet) 4.6kg __________________ John Last edited by Mercuriell; 12-29-2008 at 08:50 PM..

12-26-2008, 07:40 AM	#3 (permalink)
Aussie_G Registered Users Join Date: Mar 2008 Location: Greenville, SC	Seems to fly pretty well, what is your setup? On another note, Man I miss the Sunshine Coast, I lived in Beenliegh before moving here to South Carolina... __________________ Outrage R/C - Enter The Rage! There are only two ways to fly - my way and the right way

12-28-2008, 11:41 PM	#5 (permalink)
NolanManley Registered Users My HF Map location Join Date: Apr 2004	Built but not flown yet. Odin Kit YS91SR Hatori SB-19 Pipe Hitech 6975 on Cyclic GY611 w/9256 Futaba S9253 Throttle Multi Gov Pro Perfect Regulator 6V Outrage 2S 3600 Lipo Radix 710 K&B TR blades Total weight no fuel 9 lbs 4.2 oz. Pics later. Build thread here; http://www.runryder.com/helicopter/t481143p1/ __________________ Stratus & Protos. Magnum Fuel, KBDD intl Products Last edited by NolanManley; 12-29-2008 at 06:02 PM..

01-11-2009, 03:29 PM	#7 (permalink)
Mercuriell HF Support Thread Starter Join Date: Sep 2006	Sunday afternoon Odin at Coolum No hardcore 3D here - just a nice sunny Sunday afternoon lazing around the sky with the Odin - for those of you suffering winter you might want to check out what a blue sky looks like !! Compass Odin - sport - light 3D flight 23MB wmv __________________ John

12-28-2008, 06:34 PM	#4 (permalink)
regiepogi Registered Users Join Date: Apr 2007	Santa must've been getting older. He didn't give me an Odin.

01-15-2009, 11:08 AM	#8 (permalink)
Tradhunt Registered Users My HF Map location Join Date: Nov 2006	Got my Odin in yesterday. Almost done with the basic build. I'm still waiting on my electronics and engine. I'll post some pic's tonight. I plan on running... Ys or Align 91 I haven't made up my mind yet.. With the RJX 90 pipe Ino-Labs 751mg servos Solid-G/9256 Perfect regulator CCPM version Atg since I have never tried one I've always ran multigov's Rotortech 710 main's and Rotortech tails... __________________ George I don't crash. I land with style. Bowtech and Hoyt

01-18-2009, 04:15 AM	#9 (permalink)
Mercuriell HF Support Thread Starter Join Date: Sep 2006	Maiden Knight fright Maidened my Knight 3D today (thanks Ben for the build ) - gee that's a pretty little heli with the SAB Red Devils on - didn't realise there was so much nice blue bling on the head. Anyway was a new motor (OS50 Hyper) so we ran her rich but wow - she flips on a pin and roll was pretty impressive too - really looking forward to flying this heli (if I can get it back off Ben ) OS 50Hyper SX - SAb Red Devil 600 - ALign 95 tail - GY611 & 9256 - Align 620 on 8V from AR7100R Attached Thumbnails __________________ John

02-01-2009, 05:51 AM	#12 (permalink)
alain_soresca Registered Users Join Date: May 2007	Hi Mercuriell, may i request a picture of the Odin and Knight3D side by side for us to have an idea on the size diff.? thanks __________________ Alain

02-01-2009, 06:36 AM	#13 (permalink)
Mercuriell HF Support Thread Starter Join Date: Sep 2006	This is the best pic I've got at the moment - not sure of the owner so hope they don't mind me posting - My Knight borrowed by my buddy so I 'll post my own version in a few days !! Attached Thumbnails __________________ John

02-02-2009, 08:47 PM	#14 (permalink)
regiepogi Registered Users Join Date: Apr 2007	If my memory serves me right, I think the owner is Kimber1911. A fellow Filipino who's now in Seattle. Alain, I'll make another build log. This time the Odin. Of course you can fly it as well once it's built.

02-07-2009, 12:06 AM	#15 (permalink)
Mercuriell HF Support Thread Starter Join Date: Sep 2006	Side by Side Here's the two girls out sunning themselves before a bit of aerial abuse ! As you can see similar size - just a longer boom on the Knight - goes with the concept of a 90 engine in a 50 frame Attached Thumbnails __________________ John

02-07-2009, 12:48 AM	#16 (permalink)
alain_soresca Registered Users Join Date: May 2007	Mercuriell - thanks for the pictures. regiepogi - wow another heli? that would be great.. thanks for the offer sir. see you soon. __________________ Alain

02-19-2009, 02:27 PM	#17 (permalink)
krunder Registered Users My HF Map location Join Date: Jun 2005	Here are some pictures of my setup, and a video: http://www.thepitchbrothers.com/inde...166-odin-setup Best regards Krunder __________________ http://www.thepitchbrothers.com/

02-22-2009, 09:26 PM	#18 (permalink)
Tradhunt Registered Users My HF Map location Join Date: Nov 2006	Well here's mine. Finally... I made a couple change's to it then what I listed in an earlyer post. I haven't gotten the chance to fly it yet (weather) still need to break-in the engine... My setup: OS 91Hz Outrage 90 pipe Solid-G/9256 Align 610 servo's Fromeco reg. Outrage 2s 3600 Rotortech 710 main's Rotortech 105 on the tail Multigov/Hs-85 throttle Ignore the bad wiring job. Been test fitting and I might change the setup a bit with some 8717's and a AR7100R for an 8v setup. That will take up less space and I'll just plug the fan into the 8v throtle port. Attached Thumbnails __________________ George I don't crash. I land with style. Bowtech and Hoyt

02-23-2009, 06:15 AM	#19 (permalink)
regiepogi Registered Users Join Date: Apr 2007	Nice setup Tradhunt. I would love to know the things you did and materials as well to relocate the rudder servo in front.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in