 |
START HERE |
|
| Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
|
|
|
Unregistered
|
||||||
| Blade 400 Blade Helicopters (eFlite) 400 Helicopters |
|
|
 |
|
|
LinkBack | Thread Tools | Display Modes |
06-16-2010, 05:39 PM
|
#1 (permalink) |
|
Registered Users
Join Date: Apr 2010
|
Blade 400 newbie servo question
im setting up my blade 400 after a crash and i need some help. whats happening is when i turn the rudder stick to the left, the helicopter goes right. and when i turn the rudder stick to the right, the helicopter goes left. so i don't know what is happening. need some advice.
thanks.
__________________
Kyle 
|
|
|
| Sponsored Links | |||
|
Advertisement |
|
||
|
06-16-2010, 05:47 PM
|
#2 (permalink) |
|
Registered Users
Join Date: Jan 2010
|
Assuming the Gyro channels are set correctly, not sure from what you explain so far but if you are manually giving input and getting opposite reactions, you will need to reverse the rudder channel on your TX.
__________________
Trex 550 w/ MicroBeast FBL, Trex 450 w/ MicroBeast FBL, Blade 130x, Dx7s, Phoenix Sim |
|
|
|
|
06-16-2010, 05:56 PM
|
#3 (permalink) |
|
Registered Users
Thread Starter
Join Date: Apr 2010
|
how do you do that?
__________________
Kyle
|
|
|
|
|
06-16-2010, 06:04 PM
|
#4 (permalink) |
|
Registered Users
Join Date: Apr 2008
|
go into your reverse setting in radio (TX) and reverse rudder ..give that a shot..
__________________
700LE : 105HZR AR7200BX JR8917 Multi gov , JR9503 600ESP : 100AMP Castle. Scorpion Motor . AMA #962896 400 Blade : Scorpion 2221-6 ,Castle ICE 50 Sonix Head and t Align 450 pro V2 3G MKS DS95 MSR , 2 x MCPX (brushless C05 & HP05), Blade 130X. |
|
|
|
|
06-16-2010, 06:07 PM
|
#5 (permalink) |
|
Registered Users
Join Date: Jan 2010
|
PM reply inbound
__________________
Trex 550 w/ MicroBeast FBL, Trex 450 w/ MicroBeast FBL, Blade 130x, Dx7s, Phoenix Sim |
|
|
|
|
06-17-2010, 04:04 PM
|
#6 (permalink) |
|
Registered Users
Join Date: May 2010
|
also if you did anything with the tail boom make sure the tail rotor is still turning counter clockwise. i had this problem because when i replaced the boom i turned the belt 90 degrees down instead of 90 degrees up so it was spinning backwards.
__________________
Blade mCP X, Spin 16300kv, Xp-7a, SR-120 Tail, Full Metal Head, Mircoheli Frame,DX6i |
|
|
|
|
06-17-2010, 09:03 PM
|
#7 (permalink) | |
|
Registered Users
Join Date: May 2008
|
Quote:
__________________
"If you can't fix it with a hammer, you've got an electrical problem."
|
|
|
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
