Trex700 nitro bavarian demon 3sx

[Cicero36]

Hi,

Does anybody here used this gyro on their Nitro Trex, Is there a link or video that shows how to set this gyro and properly connecting the wires on a Futaba T10J receiver?. I will also appreciate if anybody knows how to set the idle up on T10J. The manual does not quite show how to excatly set it up.


Thank you!

[mqowen]

Originally Posted by Cicero36

Hi,

Does anybody here used this gyro on their Nitro Trex, Is there a link or video that shows how to set this gyro and properly connecting the wires on a Futaba T10J receiver?. I will also appreciate if anybody knows how to set the idle up on T10J. The manual does not quite show how to excatly set it up.


Thank you!

I use it for mine, but I use a T8FG Super. There is a BD 3SX forum that is really helpful.

[guyguerra]

I use a BD3SX on my Gaui NX7. The manual does a very good job of showing the wiring configuration. If the Futaba receiver is SBus it would plug into the second or third slot in the Demon, the manual shows which one. The software also shows this really well, for all types of receivers, and the wizard will guide you through the process. There are pop up boxes in the software with explanations, and most of the default settings on p gain etc., work well. Once finished you come back into the program to set up the bailout feature. All of this can be bench checked without the blades on. You'll find a bunch of info on the Demon forum, but it's pretty straight forward.