Vib Problem

[RCFred]

New to Skookum FBL. First flights for x3 purchased used BNF w/ sellers TX file. 720 blue; Castle Phoenix Lite 50; rpm sensor; BEC. Using 720 gov.

Yesterday son flew 2 flights moderate 3D; all fine and I did not notice any 720 error message (FBL mounted up top).
Today flew easy sport and on landing noticed the Green, with Red Flicker Flight Mode – High Vibration Warning. Flew a second flight and 90 seconds in the power dropped though motor was still turning; went straight down but no harm- skids on grass. Again High Vibration Green Red Flicker error message; 24v on battery.
I come home and plug into 720 setup software.
"WARNING: Vibration" in yellow.

Control is set to Logging: Vibration.

Log Data Viewer showed a hugh spike at ~250-280. A pop-up said vibration was extreme. I'll post pic if I can figure out how.
Thx

[georgi UK]

Originally Posted by RCFred

New to Skookum FBL. First flights for x3 purchased used BNF w/ sellers TX file. 720 blue; Castle Phoenix Lite 50; rpm sensor; BEC. Using 720 gov.

Yesterday son flew 2 flights moderate 3D; all fine and I did not notice any 720 error message (FBL mounted up top).
Today flew easy sport and on landing noticed the Green, with Red Flicker Flight Mode – High Vibration Warning. Flew a second flight and 90 seconds in the power dropped though motor was still turning; went straight down but no harm- skids on grass. Again High Vibration Green Red Flicker error message; 24v on battery.
I come home and plug into 720 setup software.
"WARNING: Vibration" in yellow.

Control is set to Logging: Vibration.

Log Data Viewer showed a hugh spike at ~250-280. A pop-up said vibration was extreme. I'll post pic if I can figure out how.
Thx

=] Fred, it's not right you are left alone here, I was hoping someone would buddy you as you need to be able to post logs and pics, I'm pretty much flat out here, but please mail me gmcallisterocvc@gmail.com and I will explain it to you,,,,,,