Register Now

tntburnett · 11-28-2013, 08:21 PM

The 180QX flies great indoor and out esp in the lil wind I was flying it in. Also the wobble that the mqx use to have the 180 doest do it as bad the gyros are great. Also if you start it in mode 0 or mode 1 two of the motors my start a lil late but don't worry it suppose to to do that. It use some of the same parts from the MQX like the gears, motor mounts, props and motors, the frame is different that is the only different thing on it besides the landing gear.

The camera does ok not to bad its not a gopro but it does what it need to do to get it done. It doesnt like direct sunlight but it works. Also I like the feature of using the tx to switch modes between picture and videos also that you can take it off and use it on anything else just plug it a open channel oand off you go. Blade did a great job on this lil guy I just wish that they would include the jr 9503 and 9303 in the direction but i figured it out. Other than it a great lil quad.

Blade 180 QX open box, flight review etc (12 min 57 sec)

Blade 180QX flight, videoing from the 180QX (6 min 18 sec)

Be Blessed
Isaac

Cman · 11-29-2013, 10:52 AM

Thanks for the video's

I did not even know this was released yet.

tntburnett · 11-29-2013, 12:49 PM

Quote:

Originally Posted by Cman

Thanks for the video's

I did not even know this was released yet.

You're welcome. Im happy to put new product out there.

Be Blessed
Isaac

angeliak · 12-01-2013, 06:17 AM

Travel Adj:
GEAR (0)↑ 100%; GEAR (1) ↑40%

i am confused woth this settinds. from what i understand gear switch in position 0 should be 100%. then in position one ?? what does that 40 up means? in the tx the values here are negative...

tntburnett · 12-01-2013, 08:24 AM

Quote:

Originally Posted by angeliak

Travel Adj:
GEAR (0)↑ 100%; GEAR (1) ↑40%

i am confused woth this settinds. from what i understand gear switch in position 0 should be 100%. then in position one ?? what does that 40 up means? in the tx the values here are negative...

on my jr9503 i left everthing 100% i just flip from 0 to 2 and back to 0 on my flight mod switch
on my tx in acro is flap the flap switch. My flight mod switch is 3 pos.

Be Blessed
Isaac

Heli-cat · 12-01-2013, 08:43 AM

Thanks for taking the time to make these vids, Isaac...I never thought I would want a quad but I'm now pretty convinced I'm going to ask Santa for one of these for Christmas...You made it look great. Nice job!

tntburnett · 12-01-2013, 08:58 AM

Quote:

Originally Posted by Heli-cat

Thanks for taking the time to make these vids, Isaac...I never thought I would want a quad but I'm now pretty convinced I'm going to ask Santa for one of these for Christmas...You made it look great. Nice job!

Glad to be of service

Be Blessed
Isaac

dcarboni · 12-01-2013, 09:30 AM

Nice job!!!!

tntburnett · 12-01-2013, 09:56 AM

Quote:

Originally Posted by dcarboni

Nice job!!!!

Thank you.

Be blessed
Isaac

Sent from my Galaxy Nexus using Tapatalk

krimo · 12-01-2013, 02:17 PM

Quote:

Originally Posted by tntburnett

You're welcome. Im happy to put new product out there.

Be Blessed
Isaac

The video was really informative. I think I'll ask Santa for one as well!

Thank you Issac

tntburnett · 12-01-2013, 02:45 PM

Quote:

Originally Posted by krimo

The video was really informative. I think I'll ask Santa for one as well!

Thank you Issac

Glad I could help

Be Blessed
Isaac

ks9818 · 12-01-2013, 06:13 PM

what software to you use to upconvert to 720P ? or do you need it to?..Mine seems fuzy and lots of "jello"...

Neunerball · 12-02-2013, 10:39 PM

Quote:

Originally Posted by ks9818

what software to you use to upconvert to 720P ? or do you need it to?..Mine seems fuzy and lots of "jello"...

I'm looking for an answer to that myself!

Metroart · 12-02-2013, 11:17 PM

Thanks TNT - if that's the video quality that pretty awesome, especially PIP. Wasn't much of a quad guy but maybe I need one of these - oh, Santa

tntburnett · 12-03-2013, 01:07 AM

Quote:

Originally Posted by ks9818

what software to you use to upconvert to 720P ? or do you need it to?..Mine seems fuzy and lots of "jello"...

Im using windows media player and wondershare
Video editing. Seem to be fine.

Be blessed
Isaac

Quote:

Originally Posted by Metroart

Thanks TNT - if that's the video quality that pretty awesome, especially PIP. Wasn't much of a quad guy but maybe I need one of these - oh, Santa

You are welcome :-) glad to help.

Be blessed
Isaac

Sent from my Galaxy Nexus using Tapatalk

Chris Arena · 01-29-2014, 01:27 PM

My wife is a real estate agent and I am interested in this model as a cheap introduction to photographing still overhead views of homes for some of her listings.
(Also an occasional sanity break from my 130x)!
If possible could someone take some overhead still photos of a home and upload them. I would really appeciate it.
Also, if needed, is thier an upgrade camera that would fit this model and at least give 2-3 minute flight times?

11-29-2013, 10:52 AM	#2 (permalink)
Cman Registered Users Join Date: Dec 2009	Thanks for the video's I did not even know this was released yet. __________________ C Blade 230S, Nano cpx, nano qx/3dqx/fpv, 200qx MCPX V2, Align Trex 250, 250 DFCplus, Trex 450 plus,Trex 500, JR Forza 450, and more I retired

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-01-2013, 06:17 AM	#4 (permalink)
angeliak Registered Users Join Date: Mar 2011	Travel Adj: GEAR (0)↑ 100%; GEAR (1) ↑40% i am confused woth this settinds. from what i understand gear switch in position 0 should be 100%. then in position one ?? what does that 40 up means? in the tx the values here are negative...

12-01-2013, 08:43 AM	#6 (permalink)
Heli-cat Registered Users Join Date: Jun 2011	Thanks for taking the time to make these vids, Isaac...I never thought I would want a quad but I'm now pretty convinced I'm going to ask Santa for one of these for Christmas...You made it look great. Nice job!

12-01-2013, 09:30 AM	#8 (permalink)
dcarboni Registered Users Join Date: May 2012	Nice job!!!!

12-01-2013, 06:13 PM	#12 (permalink)
ks9818 Registered Users Join Date: Jan 2013	what software to you use to upconvert to 720P ? or do you need it to?..Mine seems fuzy and lots of "jello"...

12-02-2013, 11:17 PM	#14 (permalink)
Metroart Registered Users Join Date: Sep 2013	Thanks TNT - if that's the video quality that pretty awesome, especially PIP. Wasn't much of a quad guy but maybe I need one of these - oh, Santa

01-29-2014, 01:27 PM	#16 (permalink)
Chris Arena Registered Users Join Date: Feb 2010	My wife is a real estate agent and I am interested in this model as a cheap introduction to photographing still overhead views of homes for some of her listings. (Also an occasional sanity break from my 130x)! If possible could someone take some overhead still photos of a home and upload them. I would really appeciate it. Also, if needed, is thier an upgrade camera that would fit this model and at least give 2-3 minute flight times?

Register Now

Log-in