Register Now

Phasor · 07-12-2009, 07:08 PM

I guess that I will be the first to post here! I have an older Emaxx 3906 that I got from a friend. This is my first foray into RC trucks. I am considering upgrading the motors to Kershaw Designs Revolver dual 700 kit and was wondering if anyone had any experience with this kit. I will be running two 2S 5000 mah lipos.

Phasor

Ring Leader · 07-12-2009, 07:15 PM

I had experience with it.. the experience of shattering every single part on that thing.. hate to say this but I'd recommend selling it and going with something a bit more durable.

Phasor · 07-15-2009, 03:06 PM

I also have a brushless E Revo that seems to be pretty sturdy. I got the E Maxx for practially nothing and was just going to use it as a basher....Was interested in the Kershaw dual 700 motor kit and any experiences with it.

Thanks, Phasor

Saturn949 · 08-26-2009, 11:24 AM

Quote:

Originally Posted by Phasor

I also have a brushless E Revo that seems to be pretty sturdy. I got the E Maxx for practially nothing and was just going to use it as a basher....Was interested in the Kershaw dual 700 motor kit and any experiences with it.

Thanks, Phasor

it is will be cheaper to get one Titan775 from summit with summit pinion. i have single 775 on e revo and it is blast then play with spur gear and get your self novk 5mm 19t pinion and you will have troble to handle the truck in top speed. I had emax before convertedand had troble to handle overpowered car

went to revo after this

Zoobie · 09-11-2009, 02:12 PM

I have ordered a brushless system from hobbycity.com for my 3906 and although the point is for longer run times and a touch more speed over stock i anticipate some damage. is there a compatibility Chart or something to see what parts from the old emaxx fit the new one.

thanks

damyxz · 01-14-2010, 11:30 PM

I have an E-maxx(older model) that I outfitted with the CC mamba monster system.....amazing power!!

jayboy0093 · 03-21-2010, 06:35 PM

buddy has a e-revo with mamba 1/8 on it and it is a blast

pat.m23 · 05-15-2012, 08:49 AM

on my emax i put the mamba monster esc with the 22ookv motor and up graded the drive lines and trans gears and newer had a prob and its crazy fast

07-12-2009, 07:08 PM	#1 (permalink)
Phasor Registered Users Join Date: Jun 2008	Traxxas Emaxx I guess that I will be the first to post here! I have an older Emaxx 3906 that I got from a friend. This is my first foray into RC trucks. I am considering upgrading the motors to Kershaw Designs Revolver dual 700 kit and was wondering if anyone had any experience with this kit. I will be running two 2S 5000 mah lipos. Phasor

07-12-2009, 07:15 PM	#2 (permalink)
Ring Leader Registered Users My HF Map location Join Date: May 2009	I had experience with it.. the experience of shattering every single part on that thing.. hate to say this but I'd recommend selling it and going with something a bit more durable. __________________ A horse is a sphere if it makes the numbers easier

09-11-2009, 02:12 PM	#5 (permalink)
Zoobie Registered Users My HF Map location Join Date: May 2006	emaxx 3906/3905 parts compatibility I have ordered a brushless system from hobbycity.com for my 3906 and although the point is for longer run times and a touch more speed over stock i anticipate some damage. is there a compatibility Chart or something to see what parts from the old emaxx fit the new one. thanks

01-14-2010, 11:30 PM	#6 (permalink)
damyxz Registered Users My HF Map location Join Date: Jan 2007	I have an E-maxx(older model) that I outfitted with the CC mamba monster system.....amazing power!! __________________ _____________________ Scott's Hobbies DVS inc.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-15-2009, 03:06 PM	#3 (permalink)
Phasor Registered Users Thread Starter Join Date: Jun 2008	I also have a brushless E Revo that seems to be pretty sturdy. I got the E Maxx for practially nothing and was just going to use it as a basher....Was interested in the Kershaw dual 700 motor kit and any experiences with it. Thanks, Phasor

03-21-2010, 06:35 PM	#7 (permalink)
jayboy0093 Registered Users Join Date: Mar 2010	buddy has a e-revo with mamba 1/8 on it and it is a blast

05-15-2012, 08:49 AM	#8 (permalink)
pat.m23 Registered Users Join Date: May 2012	on my emax i put the mamba monster esc with the 22ookv motor and up graded the drive lines and trans gears and newer had a prob and its crazy fast

Register Now

Log-in