LCD Field terminal

Jamesppp · 07-28-2012, 07:24 PM

Can I load the setup file from each Skookum 720 and 540 onto the field terminal. If so, can I do it from the PC without connecting the terminal to each Gyro?

I know I can load each setp from the GUI file menu but dont know if I can load the setups into the terminal for possible editing and reinstalling at the field

Thanks

ModelGuard · 07-29-2012, 03:35 AM

No the sk can only connect to one device. Either the field terminal or a pc. You cannot connect the terminal to a pc.
You would have to load a profile to the pc. Change stuff load back to sk reconnect terminal and save profile

www.modelguard.com

ArguZ · 07-29-2012, 12:30 PM

Well, the field terminal holds different files , so you can use it for the different Gyros on the field.
Both Gyros hold their settings and the LCD will show those when connected.
But you can also SAVE multiple versions on those settings to the LCD.
Would be not much use if you needed a PC all the time

07-28-2012, 07:24 PM	#1
Jamesppp Registered Users Join Date: Feb 2008 Location: Carrollton,Georgia	LCD Field terminal Can I load the setup file from each Skookum 720 and 540 onto the field terminal. If so, can I do it from the PC without connecting the terminal to each Gyro? I know I can load each setp from the GUI file menu but dont know if I can load the setups into the terminal for possible editing and reinstalling at the field Thanks __________________ Compass7HV,Sk720HeliJive120HV Pyro 700 52L allHV Outrage 550: Scorpion 4020-1390,CC125A ESC,WR ESC Logo 5003D Scorpion Sk720 4020-1100, Blade130X MCPX TT E-620 SE x 2: Scorpion 4025-740 CCHV85 ,770/8900

07-29-2012, 03:35 AM	#2
ModelGuard Registered Users Join Date: Feb 2011 Location: Uk	No the sk can only connect to one device. Either the field terminal or a pc. You cannot connect the terminal to a pc. You would have to load a profile to the pc. Change stuff load back to sk reconnect terminal and save profile www.modelguard.com __________________ SimStream wireless from your transmitter to simulator http://www.modelguard.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-29-2012, 12:30 PM	#3
ArguZ Registered Users Join Date: Dec 2011 Location: Denmark, Copenhagen	Well, the field terminal holds different files , so you can use it for the different Gyros on the field. Both Gyros hold their settings and the LCD will show those when connected. But you can also SAVE multiple versions on those settings to the LCD. Would be not much use if you needed a PC all the time